Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
WHP= |
Flow, gpm X TDH, ft/ 3960 |
|
What happens if ph is too high |
Scaling in mains |
|
What temp is water most dense |
4 degrees C |
|
What are the main sources of water hardness |
Calcium magnesium |
|
What type of meter meter measures turbidity |
Nephelometric |
|
When placing a main in service what is the first test performed |
Flow |
|
At what temperature will the fusible plugs in a chlorine cylinder melt |
71-74 degrees C |
|
How many samples must be collected after a positive coliform test |
4 |
|
One use of polyphosphate in water treatment is |
Keeps iron and manganese in solution |
|
What is the recommended free chlorine residual for the farthest point in the distribution system |
0.20 mg/l |
|
What causes black staining |
Manganese |
|
What is the most effective disinfectant |
Free available chlorine |
|
What is used to detect a chlorine gas leak |
Amonia vapor |
|
The usual percentage of unaccounted-for water in a fully metered system is |
10-20% |
|
At what temperature does chlorine gas freeze |
49.5* F |
|
Formula to find how many gallons of chlorine for treatment |
MG x mg/l |
|
How many lb of chlorine for treatment |
MG x 8.34 x mg/l |
|
If the water in the reservoir drops eight feet what will the head on the pump do |
Increase |
|
Dose= |
Demand + residual |
|
Residual = |
Total chlorine. Combined+free |