Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
25 Cards in this Set
- Front
- Back
Which of the following is the major concern of Navy personnel aboard small boats?
• Crew safety • Passenger safety • Both 1 and 2 above • Other vessels |
Both 1 and 2 above
|
|
The deck of the machinery spaces is painted what color?
• Dark red • Haze gray • Deck gray • Dark green |
Dark red
|
|
Which of the following hazards is/are associated with jet aircraft on flight decks?
• Being blown overboard • Being burned by jet exhaust • Being sucked into jet intakes • Each of the above |
Each of the above
|
|
Feathering the paint edges of chipped or scraped areas should be done with which of the following tools?
• Chipping hammer • Scraper • Sandpaper • Hand wire brush |
Sandpaper
|
|
When handling lines or taking part in underway replenishment, you must always wear what article of safety equipment?
• Ear plugs • Inherently buoyant life jacket • Safety glasses • Inflatable life jacket |
Inherently buoyant life jacket
|
|
You would use a rotary scaling and chipping tool on which of the following jobs?
• To chip a bulkhead • To chip up old tile • To chip a large deck area |
To chip a large deck area
|
|
If you have a cut on your hand, what precaution, if any, should you take when using paint remover?
• Use a simple dressing • Put a bandage over the cut • Wear gloves • None |
Wear gloves
|
|
What type of information is contained in Material Safety Data Sheets?
• Information about hazardous material • Transfer dates • The age of the materials • Supply codes |
Information about hazardous material
|
|
What ingredient is the most common one used to make thinners?
• Water • Linseed oil • Denatured alcohol • Mineral spirits |
Mineral spirits
|
|
What type of remover should you use to remove natural oil-based paints?
• Xylene • Water • Turpentine • Alcohol |
Turpentine
|
|
When performing maintenance or upkeep on equipment or machinery, you would find applicable safety precautions in which of the following publications?
• Planned maintenance system (PMS) cards • Operator’s manuals • Technical manuals • Each of the above |
Each of the above
|
|
What color paint is used to paint the underside of deck overhangs?
• White • Deck gray • Haze gray • Black |
White
|
|
Besides fuel and ammunition handling spaces, smoking is prohibited in which of the following areas?
• Flight deck • Hangar deck • Both 1 and 2 above • Crew lounge |
Both 1 and 2 above
|
|
Which of the following safety actions should you take?
• Observe all safety precautions • Report unsafe conditions • Warn others of hazards • Each of the above |
Each of the above
|
|
How many methods does the Navy use to apply paint?
• Four • Three • Two • One |
3
|
|
Paint pigment provides the coloring, rust prevention, and lasting quality of paint. Pigment is made from which of the following metals?
• Lead • Zinc • Titanium • All of the above |
All of the above
|
|
What is meant by the terms laying on and laying off?
• Applying strokes first in long strokes in one direction and then crossing your first strokes • Spraying 10 inches away and then misting • Double coat, going from left to right |
Applying strokes first in long strokes in one direction and then crossing your first strokes
|
|
What are the two most useful brushes to use when painting?
• Sash tool brush and painter’s dusting brush • Flat brush and fitch brush • Sash tool brush and fitch brush • Flat brush and sash tool brush |
Flat brush and sash tool brush
|
|
What is the first sign of galvanic corrosion on aluminum?
• Disintegration of the rivets or bolts holding the aluminum • Pitting and scaling of the surface • Appearance of a white powdery residue • Loose rivets, screws, or bolts holding the aluminum |
Appearance of a white powdery residue
|
|
Paint consists of a total of how many essential ingredients?
|
4
|
|
What tool should you use to remove deeply embedded rust?
• A power-operated heavy-duty wire brush • An electric disk sander • A pneumatic hammer • A rotary chipping tool |
A power-operated heavy-duty wire brush
|
|
What is the minimum amount of drying time required between primer coats?
• 12 hours • 24 hours • 8 hours • 4 hours |
8 hours
|
|
The most important safety precaution to follow when using portable tools is to make sure they are properly grounded.
T/F? |
True
|
|
What minimum number of coats of primer should be used on a surface cleaned to bare metal?
|
2
|
|
Which of the following petroleum products must NEVER be used to thin paint?
• Kerosene • Diesel oil • Both 1 and 2 above • Mineral spirits |
Both 1 and 2 above
|