Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
18 Cards in this Set
- Front
- Back
What system is currently used by all branches of the military to identify test equipment?
|
Joint Electronics Type Designation System (JETDS).
|
|
Name the two classes of test equipment.
|
General-purpose electronic test equipment (GPETE) and special-purpose electronic test
equipment (SPETE). |
|
What test equipment is designed to generate, modify, or measure a range of parameters of
electronic functions of a specific nature required to test a single system or equipment? |
Special-purpose electronic test equipment.
|
|
Name the two basic elements of the SCLSIS program.
|
Validation and updating.
|
|
What calibration label is used when actual measurement values must be known to use the test
equipment? |
CALIBRATED—REFER TO REPORT.
|
|
An instrument that must be calibrated in place requires what type of calibration label?
|
SPECIAL CALIBRATION label.
|
|
Responsibility for repair and maintenance of test equipment generally rests with what group of
personnel? |
Maintenance personnel.
|
|
What Navy office oversees the MEASURE program?
|
The Chief of Naval Operations.
|
|
What are the two main categories of maintenance?
|
Preventive and corrective maintenance.
|
|
What type of maintenance involves isolating equipment troubles and replacing defective parts?
|
Corrective maintenance.
|
|
Which quantity (voltage or current) determines the intensity of an electrical shock?
|
Current.
|
|
What tool is used to de-energize capacitors in a circuit that has been disconnected from its power
source? |
Shorting probe.
|
|
On what range should you set the voltmeter prior to taking a voltage measurement?
|
Highest.
|
|
When taking a voltage measurement, which lead of the voltmeter should you connect to the circuit
first? |
Ground.
|
|
Is an ammeter connected in series or in parallel with the circuit under test?
|
In series.
|
|
What must be done to a circuit before you can use an ohmmeter for testing?
|
It must be de-energized.
|
|
What is the term used to refer to the losses which can be traced to the dielectric of a capacitor?
|
Power losses.
|
|
What effect does an increase in capacitance have on a capacitor’s opposition to current flow?
|
Opposition to current flow decreases.
|