Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
6 Cards in this Set
- Front
- Back
Start Sequence |
Clear engines Bleed air open Condition lever to run Started engaged- watch for light Rotation- within 5 seconds Indication- watch for RPM Fuel flow- 16% Ignition- rise in TIT by 35% Eng/ GB oil press.- 35% Hydraulics- on speed, within 30 seconds Parallel- 65% Series- drop and momentary peak TIT Stable start- gauges for proper limitations Continue checklist |
|
Minimum Bleed Air Pressure |
35 psi |
|
TIT limits for starting |
750-830 850 max allowed 965 overheat |
|
Emergency Shutdown Procedure |
1:Throttle- As required 2:Condition Lever- Feather (Fire, nacelle OH, start valve open, visible fluid leak, throttle cable fail) 3:Fire handle- pulled 4:Fire extinguisher- discharged as required (If a fire, nacelle OH or other indication of fire) a: if condition persists, isolate the wing b: if condition persists, discharge remaining bottle 5: Flaps- as required 6: Landing gear- as required 7: Propeller- Feathered |
|
Emergency shutdown conditions |
Engine fire Nacelle overheat Turbine overheat Uncontrollable rise in TIT Uncontrollable rise in oil temp Uncontrollable drop in oil pressure Generator fails to disconnect Excessive or uncontrollable power Unusual vibration or roughness Certain prop malfunctions Start valve open light illuminates Throttle control cable failure Excessive visible fluid leak Certain hydraulic malfunctions |
|
Tailpipe fire or torching on start |
Condition lever- ground stop Continue to motor the engine with the starter (If flames spread beyond the tailpipe or continue) Perform groun evacuation procedure |