Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
23 Cards in this Set
- Front
- Back
CG-3378
|
Boat Alterations
|
|
CG-3379
|
Ship Alterations
|
|
CG-2920
|
Current Ships Maintenance Report
|
|
CG-3439
|
Electronics Alterations
|
|
CG04094
|
Shore Station Maintenance Request
|
|
Boat Alt (3378) is used to approve and change electronic equipment on?
|
Standard vessels under 65 feet in length
|
|
Ship Alt (3379) is used to approve and change electronic equipment on?
|
Vessels 65 feet in length or greater
|
|
The Current Ships Maintenance Project form (2920), or CSMP, is used by who and for what?
|
· By vessels of 65 feet or greater, and
· To request assistance with projects that are beyond the ability of the unit’s workforce. |
|
Electronics Alterations, or Electron Alts (3439), are issued to describe and approve a change to installed electronics equipment on?
|
· All Coast Guard shore units, and
· Nonstandard boats. |
|
The Shore Station Maintenance Request or SSMR (4094) is the shore
unit’s version of a CSMP. The SSMR is used by who and for what? |
· At shore stations, and
· To request maintenance related changes, replacements and improvements to electronic equipment and spaces. |
|
How many types of safety tags are there, and what color are they?
|
Two
Caution tags (Yellow) Danger tags (Red) |
|
There must be less than ____ ohms of resistance between the safety ground lead and the neutral lead in the AC power line.
|
0.5 ohms
|
|
Define configuration management.
|
A system of management which ensure that electronic equipment and procedures are done according to Coast Guard established standards.
|
|
Who is responsible for CG wide configuration management?
|
SMEF
|
|
Current field change listings can be found in what pubs (Instructions
magazines)? |
a. COMDTINST M4410.5,
b. CGPMS Work Schedule Book c. System Times (Formerly T-Magazine) d. Electronic Installation Maintenance Books |
|
Policies and procedures for BoatAlts can be found in COMDINST
|
Naval Engineering Manual, COMDTINST M13020.1
|
|
What type of information is contained in system block drawings?
|
a. Block labels for each piece of equipment in a system.
b. Major signal flow. c. Power distribution lines. |
|
What is the color of an Out Of Calibration tag?
|
orange
|
|
Completed Inactive Record Sheets should be kept for__________ months as per (Instruction) __________.
|
6 months, COMDINST 9077.1B
|
|
The minimum size (length and diameter) of any driven electrode (ground rods) to be used in any CG installation is
|
10 ft, ¾ inch in diameter
|
|
In order to insure the accuracy of all tag-out logs, an audit of existing tagged-out equipment should be conducted every ___.
|
two weeks
|
|
The maximum impedance allowed between earth ground and a facilities ground system is
|
less than 10 ohms
|
|
The maximum acceptable resistance between the ground safety (green) lead and the AC neutral lead is
|
less than .5 ohms
|