• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/19

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

19 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)

Emergency Equipment -Open door-

Fire Extenguisher


PMS, Not BCD, 10lb, Fully Charged in the green, ABC/BC Rating

In Cab Inspection

Utility Bin

Spare Fuses Present


3 Bi-Directional Reflective Warning Triangles Present

In Cab Inspection

Seat

Before getting in, acknowledge 3 point of contact


PMS & adjusted to me

In Cab Inspection

Seat Belt & Latch

PMS, Not CCF


Latches and unlatches properly, —make attempt

In Cab Inspection

Safe Start

Acknowledge you will conduct a safe start.



First engage brakes


Turn Key to on position


Wait until gauges cycle


Crank the truck


Look for ABS light indicator on dash


Announce to examiner it came on then turned off to indicate ABS works properly.

In Cab Inspection

Mirrors

PMS, Not BCD, Adjusted to me from the inside

In Cab Inspection

Windshield

PMS, Not BCD, No illegal stickers, No obstructions blocking my view.

In Cab Inspection

Windshield Wiper Arms

PMS, Not BCD

In Cab Inspection

Windshield Wiper Blades

PMS, Blades Not CCF, Flush to windshield & fluid works properly (spray)

In Cab Inspection

Defrost & Heater

Turn on heat to the highest


Turn knob to dash vents


Wave hand over defrost and


acknowledge that it works


Turn knob to floor heater


Acknowledge that it works

In Cab Inspection

Steering Wheel

PMS, No more than 10 degrees or 2 inches of free play

In Cab Inspection

Air Horn & Electrical Horn

Air Horn- Pull Roof line


Electrical Horn- Steering Wheel


PMS, & works properly

In Cab Inspection

Lights

Turn on each signal light to acknowledge


Left Turn


Right turn


4 way emergency flashers


Hi-beam Indicator -push to you

In Cab Inspection

Gauges

Coolant Temperature - 180-210 degrees


Oil Pressure gauge - 20-60 psi


Voltmeter - 12-14 volts


Air Pressure Gauge - 90- 120 psi


DEF Gauge - Functioning and is full

In Cab Inspection

Coolant Temperature

180 - 210 degrees

In Cab Inspection

Oil Pressure Gauge

20 - 60 psi


Under the RPM -left side

In cab inspection

Voltmeter

12 - 14 volts


Top corner digital

In Cab inspection

Air Pressure Gauge

90 - 120 psi


Primary & secondary is..

In Cab Inspection

DEF Gauge

Is functioning and is full


Under MPH (right side)

In Cab inspection