Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
7 Cards in this Set
- Front
- Back
|
Name 3 says a portable drill can be powered |
Electric Battery powered Pneumatically |
|
|
What are two types of shanks found on twist drills |
Straight and tapered |
|
|
What is the minimum width of bend that can be obtained at the full capacity and entire length of a standard hand brake, if the angle bar and insert bar are in place |
1” |
|
|
Name the gauges that can be found a squaring shear |
Front, back, side, bevel |
|
|
How are feed rates for twist drills measured |
Inches per revolution |
|
|
What piece of equipment does the same job as an easy edger |
Power flanger equipment |
|
|
What’s another name for spot weld |
Resistance welding |
