Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
- 3rd side (hint)
The most common fault in a FET circuit is? |
The FET |
|
|
When reverse biased, a low resistance measurement between the gate and source indicates what? |
A shorted source. |
|
|
A depletion mode MOSFET acts like a normally___________ circuit. |
Closed. |
|
|
Obvious physical difference between the construction of Depletion mode and enhancement mode MOSFET circuits is___________. |
The Depletion mode has a diffused channel. |
(Enhancement mode shown) |
|
True or False: The MOSFET is similar to a capacitor because the source acts as one plate and the oxide (the dielectric) + the drain act as the other plate. |
False. |
|
|
The purpose of a sine wave oscillator is to convert________________. |
DC energy to sinusoidal AC energy. |
|
|
What type of feedback is required to produce oscillations? |
Regenerative feedback. |
|
|
When noise is applied, the output of the feedback circuit consists of_________. |
One frequency, determined by the feedback circuit. |
|
|
The purpose of a Hartley Oscillator is to convert__________. |
DC energy to sinusoidal AC energy. |
|
|
The purpose of a RC phase shift oscillator is to convert_______. |
DC energy to sinusoidal AC energy. |
|