Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
17 Cards in this Set
- Front
- Back
Who is the System Certification Authority for DLSS systems assigned to all sea commands and portable systems?
|
NAVSEA
|
|
Who is the System Certification Authority for DLSS systems assigned to all shore based commands?
|
NAVFAC
|
|
What is the purpose of the re-entry control as it pertains to a certified Diver's Life Support System?
|
Keep as built condition
|
|
The torque value given in a REC package must fall within the working range of the wrench which is?
|
20% - 90%
|
|
Name three responsibilities of the DLSS Maintenance Technician?
|
-Be thoroughly familiar with REC procedures
-Be thoroughly familiar with documentation requirements -Perform maintenance in accordance with approved written procedures -Responsible to the DLSS REC supervisor |
|
What is the reference for the DLSS clealiness standards for oxygen?
|
MIL-STD 1330
|
|
O-rings will be inspected for abrasions, blemishes, cuts, discoloration, punctures, etc. and any further guidance can be found in thich NSTM?
|
NSTM 078
|
|
Which NSTM chapter deals with threaded fasteners
|
NSTM 075
|
|
What is the goal of the DLSS certification process?
|
To confirm that the system is built in the configuration it is being certified. All components must be replaced IAW approved drawings and procedures that must be followed verbatim.
|
|
What grade lubricant is used for air compressors in tempratures below 30 degrees F.
|
2135 TH
|
|
What is the purpose of the QA program?
|
It is a planned and systematic pattern of all the actions necessary to provide adequate confidence that a diving system conforms to established technical requirements.
|
|
Name four sections of the Pre-Survey Outline Booklet:
|
-Mechanical Make-up
-Gas Available -System Limits -Preventative Maintenance |
|
What is the purpose of System Certification Survey Cards?
|
Note deficiencies during the survey and recommend corrective actions
|
|
What is a Category 1A survey card?
|
Corrective action must be accomplished prior to manned use
|
|
A failure to correct a CAT 1C survey card by the due date will result in termination of system certification. True or False?
|
True
|
|
How often are air samples taken and what other reasons would you take an air sample?
|
Air samples are taken every 6 months give or take 2 months. Aditional testing is done when contamination is suspected, and after a system overhaul.
|
|
O2 bottles must have what documentaion on the bottle after being refilled?
|
They need to have a Certificate of Conformance with documented gas composition i.e., O2, CO2, CH4, C2H2, H20.
|