Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
29 Cards in this Set
- Front
- Back
What year was the new GDT system introduced?
|
1956
|
|
T or F:
Any increase in dimensional or form accuracy reduces tolerance buildup in the overall assembly. |
True
|
|
What three basic pieces of information does the Feature Control Symbol contain?
|
1. Feature Characterisitc symbol
2. Datum reference 3. Tolerance value |
|
What is the heart of GDT?
|
The Feature Control Symbol
|
|
What does this symbol define?
|
Profile of a Line
|
|
What does this symbol reference?
|
Angularity
|
|
What does this symbol reference?
|
Basic Dimension
|
|
What does this symbol reference?
|
Circularity
|
|
What does this symbol reference?
|
Concentricity
|
|
What does this symbol reference?
|
Cylindricity
|
|
What does this symbol reference?
|
Datum Point
|
|
What does this symbol reference?
|
Datum
|
|
What does this symbol reference?
|
Circularity
|
|
What does this symbol reference?
|
Straightness
|
|
What does this symbol reference?
|
Flatness
|
|
What does this symbol reference?
|
Perpendicularity
|
|
What does this symbol reference?
|
Paralellism
|
|
What does this symbol reference?
|
True Position
|
|
What does this symbol reference?
|
Circular Runout
|
|
What does this symbol reference?
|
Datum Target
|
|
What does this symbol reference?
|
Diameter
|
|
What does this symbol reference?
|
Least Material Condition
|
|
What does this symbol reference?
|
Maximum Material Condition
|
|
What does this symbol reference?
|
Profile of a Surface
|
|
What does this symbol reference?
|
Projected Tolerance Zone
|
|
What does this symbol reference?
|
Reference Dimension
|
|
What does this symbol reference?
|
Total Runout
|
|
What are the 5 simple rules that should always be applied in GDT?
|
1. When a tolerance of size is specified, that tolerance controls both size and form.
2. When position or datums of size are specified, modifiers must be specified 3. When form/orientation is specified, the modifier "regardless of feature size" is implied. 4. For screw threads, splines, and gears, the tolerance and datum reference originate from the pitch cyclinder axis. 5. A virtual condition exists for features of size and datum features of size. (Virtual condition is the worst acceptable condition of a feature). |
|
Refer to Chapter 8 and page 9. What are the callouts?
|
See Figure 2.
|