Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
27 Cards in this Set
- Front
- Back
Filters are designed to remove what percent of all solids and what percent of all entrained water from the fuel passing through them |
98 percent of all solids and 100 percent of all entrained water |
|
What provides a tight seal at both ends of the standpipes on the element mounting assembly |
A metal washer and fiber washer |
|
When installing fiber elements on the mounting assembly what is the correct value of torque applied |
12 foot pound or 144 inch pound |
|
Where are the daily fuel samples drawn from on the service fuel filter |
The filter sump |
|
Which is the largest of the three filter chambers |
The fallout chamber |
|
What is the first stage of filtration |
The coalescing stage |
|
What is the second stage if filtration |
The separator stage |
|
How often are samples drawn from the Outlet Chamber for lab analysis |
Taken at initial flow, every four hours under continuous flow conditions, when changing service tanks and whenever the lab is requesting re sampling |
|
What two hydraulic control valves to the filter hydraulic control system is located in the filter discharge line |
The automatic shutoff valve and pilot valve |
|
What was the main purpose in the addition of the X 75 float tester |
Allows for testing the JP-5 service filter/separator automatic devices using JP-5 as the test agent instead of water in the filter cell |
|
What is commonly known as reclamation filters |
First stage filters |
|
What is the rated capacity and operating pressure to the first stage filter |
300 gpm and am operating pressure of 125psi |
|
The interior of the shell if reclamation filters is divided into how many chambers and what are they |
3. Inlet, fallout, and outlet. |
|
As long a |
300 gpm and and an operating pressure of 125psi |
|
As long as the fuel passing through the filter contains little or no water the rotary control valve will remain in what position |
In the Down position |
|
If water collects in the filter sump faster than it can be drained off the float will rise to what position |
The Up position |
|
The rotary control valve has three operating positions and how many ports |
Down, horizontal, and up. 4 ports |
|
What is the pressure drop limit of the main fuel filter |
15psi |
|
What was the main purpose in the addition of the X 75 float tester |
Allows for testing the JP-5 service filter/separator automatic devices using JP-5 as the test agent instead of water in the filter cell |
|
What is commonly known as reclamation filters |
First stage filters |
|
What is the rated capacity and operating pressure to the first stage filter |
300 gpm and am operating pressure of 125psi |
|
The interior of the shell if reclamation filters is divided into how many chambers and what are they |
3. Inlet, fallout, and outlet. |
|
As long a |
300 gpm and and an operating pressure of 125psi |
|
As long as the fuel passing through the filter contains little or no water the rotary control valve will remain in what position |
In the Down position |
|
If water collects in the filter sump faster than it can be drained off the float will rise to what position |
The Up position |
|
The rotary control valve has three operating positions and how many ports |
Down, horizontal, and up. 4 ports |
|
What is the pressure drop limit of the main fuel filter |
15psi |