Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
72 Cards in this Set
- Front
- Back
AMR - What is ICRL capability code A1?
|
Test and Check only |
|
AMR - What do AVCAL / AMMRL Stand For?
|
AMMRL - Aircraft Maintenance Material Readiness List |
|
AMR - What is ICRL and what does it list?
|
*Lists IMA reparability by SM&R Code |
|
AMR - Who is responsible for overall AMMRL program Management / Control / Authority? |
NAVAIRSYSCOM
|
|
AMR - What do COMNAVAIRLANT, COMNAVAIRPAC, CNATRA, COMNAVAIRESFOR, COMNAVAIRSYSCOM and NAMTRAGRU have in common? |
*SECAS |
|
ICRL Capability Code - X1
|
Repair not authorized by IMA
|
|
ICRL Capability Code - X2
|
Lack of authorized equipment / tools / facilities
|
|
ICRL Capability Code - X3
|
Lack of required technical skills
|
|
ICRL Capability Code - X6
|
Lack of technical data |
|
CORROSION - Most alloys used in aircraft construction are made up of regions called what? |
Grains
|
|
CORROSION - What type of corrosion is most commonly found on aluminum and magnesium alloys? |
Pitting
|
|
CORROSION - What is the minimum day requirement for washing ashore based aircraft: Every 7/14/21/MO? |
Every 14 days |
|
CORROSION - The _ of galvanic corrosion also depends on the _ of the parts in contact. |
Rate , Size |
|
CORROSION - Which area probably receives more abuse than any other area on the aircraft? ~ Faying Surfaces and Crevices ~ Spot Welded Assemblies ~ Exhaust Impingement Areas ~ Wheel Wells |
Wheel Wells
|
|
CUSTOMS, TRADITION AND ETIQUETTE DEFINITION - Fathom |
A fathom is the average distance from fingertip to fingertip of the outstretched arms of a man and about six feet
|
|
CUSTOMS, TRADITION AND ETIQUETTE - Gun Salutes |
All gun salutes are fired at five second intervals. Gun salutes will always total an odd number
|
|
CUSTOMS, TRADITION AND ETIQUETTE DEFINITION - Forecastle |
The forecastle is the forward part of the main deck
|
|
NAMP - What does Chapter 3 cover?
|
Maintenance Concepts, Programs, and Processes |
|
NAMP - What does Chapter 5 cover?
|
Maintenance Control, Production Control and Material Control |
|
NAMP - What does Chapter 6 cover?
|
Production Divisions; Work Center Supervisor; Maintenance Training |
|
NAMP - What does Chapter 7 cover?
|
Quality Assurance (QA) |
|
NAMP - What does Chapter 10 cover?
|
Naval Aviation Maintenance Program Standard Operating Procedures (NAMPSOPs) |
|
NAMP - What does Chapter 13 cover?
|
Naval Aviation Logistics Command Management Information System (NALCOMIS) |
|
NAMP - What does Chapter 14 cover?
|
Introduction to the Maintenance Data System (MDS) |
|
NAMP - What does Chapter 15 cover?
|
Organizational Level (O-Level) Maintenance Data System (MDS) Functions |
|
NAVEDTRA 14014A, AIRMAN (AN):
|
3%
|
|
NAVEDTRA 14014A, AIRMAN (AN): How many primary sources of electrical energy do aircraft have? (Page 8-1) |
2 |
|
NAVEDTRA 14014A, AIRMAN (AN):
What converts ac power to dc power? (Page 8-3) |
Rectifier
|
|
NAVEDTRA 14014A, AIRMAN (AN): Which type of generators provide emergency electrical power in the event of main electrical power failure? (Page 8-3) |
Emergency generators
|
|
NAVEDTRA 14014A, AIRMAN (AN): What collects which is highly explosive while batteries are charging and can cause an explosion during battery charging? (Page 8-2) |
Hydrogen gas
|
|
NAVEDTRA 14014A, AIRMAN (AN): Electrically activated instruments are usually in the form of what with calibrated dials? (Page 8-7) |
Small voltmeters
|
|
NAVEDTRA 14014A, AIRMAN (AN): The pressures of hydraulic systems vary for different models of aircraft. In most pressure systems, the gauges register from 0 to what psi? (Page 8-7) |
3,000
|
|
NAVEDTRA 14014A, AIRMAN (AN): What is the fundamental unit of the nickel-cadmium aircraft storage battery? (Page 8-2) |
Cell
|
|
NAVEDTRA 14014A, AIRMAN (AN): The sintered-plate nickel-cadmium cells used in the battery consist of what two basic types? (Page 8-2) |
Vented and sealed
|
|
NAVEDTRA 14014A, AIRMAN (AN): What provides compressed air for air-conditioning and pneumatic engine starting? (Page 8-4) |
Gas turbine
|
|
NAVEDTRA 14014A, AIRMAN (AN): What converts mechanical energy into electrical energy? (Page 8-3) |
Generator
|
|
NAVEDTRA 14014A, AIRMAN (AN): The pitot-static system in an aircraft includes some of the instruments that operate on the principle of what? (Page 8-5) |
Barometer
|
|
NALCOMIS JOB STATUS CODES - M1 |
AWM in Depot
|
|
NALCOMIS JOB STATUS CODES - M2 |
AWM SE / Hangar
|
|
NALCOMIS JOB STATUS CODES - M3
|
AWM Backlog
|
|
NALCOMIS JOB STATUS CODES - M5 |
AWM Other
|
|
NALCOMIS JOB STATUS CODES - M8 |
AWM Awaiting Other Shops
|
|
NALCOMIS JOB STATUS CODES - WB
|
In Transit from AWP Locker
|
|
NALCOMIS JOB STATUS CODES - WP
|
AWP in Shop
|
|
NALCOMIS JOB STATUS CODES - WT
|
In Transit to AWP Locker
|
|
NAVEDTRA 14177A, NAVY ELECTRICITY AND ELECTRONICS TRAINING SERIES MODULE 5 -- GENERATORS AND MOTORS Which type of machine converts mechanical energy into electrical energy by using the principle of magnetic induction? (Page 1-1) |
Generator
|
|
NAVEDTRA 14177A, NAVY ELECTRICITY AND ELECTRONICS TRAINING SERIES MODULE 5 -- GENERATORS AND MOTORS What is the process by which a DC voltage output is taken from an armature that has an AC voltage induced in it? (Page 1-10) |
Commutation
|
|
NAVEDTRA 14177A, NAVY ELECTRICITY AND ELECTRONICS TRAINING SERIES MODULE 5 -- GENERATORS AND MOTORS What is the power lost in the form of heat in the armature winding of a generator known as? (Page 1-15) |
Copper loss
|
|
NAVEDTRA 14177A, NAVY ELECTRICITY AND ELECTRONICS TRAINING SERIES MODULE 5 -- GENERATORS AND MOTORS What is generated in the conductor whenever a conductor is moved within a magnetic field in such a way that the conductor cuts across magnetic lines of flux? (Page 1-1) |
Voltage
|
|
NAVEDTRA 14177A, NAVY ELECTRICITY AND ELECTRONICS TRAINING SERIES MODULE 5 -- GENERATORS AND MOTORS When a generator delivers current to a load, the armature current creates a magnetic force that opposes the rotation of the armature that is called what? (Page 1-14) |
Motor reaction
|
|
What is the core of a generator armature made from? (Page 1-16) |
Soft iron
|
|
NEETS MOD 16 - What is the checking, adjusting, or systematically aligning atest instrument to a known standard known as? (Page 1-5) • Calibration • Coordination • Validation • Alignment |
Calibration
|
|
NEETS MOD 16 - Which type of work is done to correct, reduce, or counteractwear, failure, and damage to equipment? (Page 1-15) • Calibration • Overhaul • Repair • Maintenance |
Maintenance
|
|
NEETS MOD 16 - Which label has black lettering on a white background that comesin two sizes and is the most commonly used label in the METCAL program? (Page1-5) • Warning • Danger • Calibrated • Adjusted |
Calibrated |
|
NEETS MOD 16 - Which IMA policies purpose is to streamline the procedure andcut down delays in returning your equipment to you calibrated and ready to use?(Page 1-101.
|
No reject |
|
NEETS MOD 16 - Which label has black lettering and a white background and isaffixed when the calibration is performed by the user? (Page 1-8)
• Maintenance calibration • Calibrated – Refer to report • Special calibration • User calibration |
User calibration
|
|
NEETS MOD 16 - Which type of test equipment has the capability, withoutmodification, to generate, modify, or measure a range of parameters ofelectronic functions required to test two or more equipments or systems ofbasically different design? (Page 1-3) • JORTS • ASETE • CPETE • GPETE |
GPETE
|
|
NEETS MOD 16 - Which label has black letters on a white background that isplaced over readily accessible (usually exterior) adjustments to preventtampering by the user when such tampering could affect the calibration? (Page1-9) • User calibration • Calibration-void if seal is broken • Inactive-calibrate before use • Rejected-Refer to attached tag |
Calibration-void if seal is broken
|
|
Which program was designed to keep track of all installed and portableequipment in the fleet? (Page 1-4)
• NIDIS • SCLSIS • AICIS • EICDS |
SCLSIS |
|
BUPERSINST 1430.16F, ADVANCEMENT MANUAL FOR THE ADVANCEMENT OF ENLISTED PERSONNEL OF U.S. NAVY AND U.S. NAVAL RESERVE: CHAPTER 01: How many months after the regular board convened do applicants have to submit a request for a special enlisted selection board to NAVPERSCOM? |
9 months
|
|
BUPERSINST 1430.16F, ADVANCEMENT MANUAL FOR THE ADVANCEMENT OF ENLISTED PERSONNEL OF U.S. NAVY AND U.S. NAVAL RESERVE: CHAPTER 01: Approximately how long prior to the commencement of the AEDC will NETPDTC provide accounting data and arrange lodging for the SME’s? |
2 weeks
|
|
BUPERSINST 1430.16F, ADVANCEMENT MANUAL FOR THE ADVANCEMENT OF ENLISTED PERSONNEL OF U.S. NAVY AND U.S. NAVAL RESERVE: CHAPTER 01: How often are Special Boards normally held, or as required, to consider any member who was eligible but not properly considered by the last regular board? |
Annually
|
|
BUPERSINST 1430.16F, ADVANCEMENT MANUAL FOR THE ADVANCEMENT OF ENLISTED PERSONNEL OF U.S. NAVY AND U.S. NAVAL RESERVE: CHAPTER 01: Which instruction provides information on the selection of senior enlisted personnel for promotion to commissioned officer status? |
OPNAVINST 1420.1A
|
|
BUPERSINST 1430.16F, ADVANCEMENT MANUAL FOR THE ADVANCEMENT OF ENLISTED PERSONNEL OF U.S. NAVY AND U.S. NAVAL RESERVE: CHAPTER 01: What are the competitive examinations used as a part of that E4 through E7 advancement candidates take? (Page 1-3) |
FMS
|
|
BUPERSINST 1430.16F, ADVANCEMENT MANUAL FOR THE ADVANCEMENT OF ENLISTED PERSONNEL OF U.S. NAVY AND U.S. NAVAL RESERVE: CHAPTER 01: Which selection board requires E6 personnel to pass the E7 advancement-in-rate examination prior to submitting a package? |
LDO
|
|
BUPERSINST 1430.16F, ADVANCEMENT MANUAL FOR THE ADVANCEMENT OF ENLISTED PERSONNEL OF U.S. NAVY AND U.S. NAVAL RESERVE: CHAPTER 01: No later than how many days prior to the first AEDC will NETPDTC publish a quarterly schedule with the exact dates of upcoming AEDCs? (Page 1-11) |
120
|
|
BUPERSINST 1430.16F, ADVANCEMENT MANUAL FOR THE ADVANCEMENT OF ENLISTED PERSONNEL OF U.S. NAVY AND U.S. NAVAL RESERVE: CHAPTER 01: Which advancement candidates are designated SBE on the basis of their CO/OIC recommendation and their TIR eligibility? (Page 1-5) |
E8 and E9
|
|
BUPERSINST 1430.16F, ADVANCEMENT MANUAL FOR THE ADVANCEMENT OF ENLISTED PERSONNEL OF U.S. NAVY AND U.S. NAVAL RESERVE: CHAPTER 01: How many SME’s will usually be designated by NPDC to participate in the rating AEDC? (Page 1-11) |
6
|
|
BUPERSINST 1430.16F, ADVANCEMENT MANUAL FOR THE ADVANCEMENT OF ENLISTED PERSONNEL OF U.S. NAVY AND U.S. NAVAL RESERVE: CHAPTER 01: No later than how many days prior to the scheduled AEDC should SME nominations be received by NETPDTC? (Page 1-12) |
45
|
|
|
|
|
|
|
|
|
|