Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
4 Cards in this Set
- Front
- Back
|
The clearance that allows movement between gear teeth that have to mesh is called: |
backlash
|
|
|
A belt drive consists of a driven pulley 30.000 cm in diameter which is rotating at 384.000 rpm. If there is no belt slippage, calculate the rotational speed of the driver pulley, if its diameter is 12.000 cm.
|
960
|
|
|
The tensions in the tight and slack side of a belt are 14,000 N and 900 N respectively. If the power transmission is 655 kW what is the speed of the belt if there is no slippage?
|
50
|
|
|
A pulley with a diameter of 50 cm is driven at 960 r/min. What will be the linear speed in m/s of a point on the rim of the pulley?
|
25.2
|
