Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
7 Cards in this Set
- Front
- Back
Uses multicast 224.0.0.9 |
UDP (port 520)
|
|
Administrative Distance 120
|
Routing updates Every 30 seconds and withtopology change
|
|
router rip
network 192.168.1.0 network 192.168.2.0 version 2 |
RIPv2 automatically summarizes networks at major network boundaries, summarizing routes to the classful network address.
|
|
If you have disconnected or discontiguous subnets, it is necessary to disable automatic route summarization to advertise thesubnets to ensure reachability all networks
|
When route summarization is disabled, thesoftware sends subnet routing information across classful network boundaries.
|
|
To modify the default RIPv2 behavior of automatic summarization, use the no autosummary router configuration mode command:
|
Router(config-router)# no auto-summary
|
|
The ip summary-address rip ip-address network-mask interface command is used tosummarize an address or subnet under a specific interface. This is known as manual summarization.
|
Router(config-if)# ip summary-address rip 102.0.0 255.255.0.0
|
|
You can use the show ip protocols command to verify whether automatic or manualsummarization is used.
|
.. |