Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
154 Cards in this Set
- Front
- Back
|
How long is a daily inspection good for?
|
72 hours
|
|
|
How long is a turnaround inspection good for?
|
24 hours
|
|
|
Does a daily complete the requirements of a DTA?
|
No because DTA is a daily as we'll as a turnaround
|
|
|
Who is needed to service an engine?
|
Plane captain and CDI
|
|
|
When are fuel samples taken?
|
During a turnaround inspection (card 34)
|
|
|
Where do you find the procedures for taking a fuel sample?
|
4790.2 chapter 10
|
|
|
What does microbiological growth look like?
|
It looks cloudy in the fuel
|
|
|
What is the procedure if a bad fuel sample is pulled?
|
If contaminants are present, retain sample, drain approximately 1 gallon of fuel into bucket or other suitable container, and take another sample
|
|
|
Who designated PC qualification?
|
Commanding officer (CO)
|
|
|
Who can recommend suspension/revocation of the PC qualification?
|
Maintenance officer (MO)
|
|
|
How long is a PC qualification good for and when are PC monitors due?
|
Good for 1 year then requal is required, monitors due every 6 months.
|
|
|
What is the first thing you must do before starting a DTA ?
|
Check the ADB.
|
|
|
What does ADB stand for?
|
Aircraft discrepancy book
|
|
|
What information is found in the ADB?
|
MAF'S, oil consumption, fuel samples, system checks, DTA paperwork.
|
|
|
What does "MAF" stand for?
|
Maintenance action form
|
|
|
If maintenance control says "we need a DTA done in one hour" what is your response?
|
"I will take as long as it takes to complete the inspection" or have maintenance control find more plane captains to get the job completed correctly.
|
|
|
What are the four main things you are looking for in a DTA?
|
Cracks, corrosion, FOD, security.
|
|
|
What does IRAC stand for?
|
Intrim rapid action change
|
|
|
What is an IRAC?
|
Change to a publication
|
|
|
What and where is an MSDS?
|
Material safety data sheet, located in the tool room
|
|
|
What information is in the MSDS?
|
Manufacturer, PPE, emergency procedures, contact number.
|
|
|
What does ORM stand for?
|
Operational risk management
|
|
|
What is the hand signal publication?
|
00-80T-113
|
|
|
What is the plane captains manual?
|
GAI-010
|
|
|
What is the CV natops?
|
00-80T-105
|
|
|
What is Natops aircraft refuel manual?
|
00-80T-109
|
|
|
What publication includes corrosion control and wash procedures?
|
A1-H60-GAI-010
|
|
|
What is the overall corrosion manual?
|
Navair-01-1A-509
|
|
|
What is the ground safety manual?
|
00-80T-96
|
|
|
What is the ground handling manual?
|
17-1-537
|
|
|
What is the daily and turn around publication number?
|
A1-H60CA-MRC-300 and A1-H60CA-MRC-100
|
|
|
What is the "phase deck" publication number?
|
A1-H60CA-MRC-400
|
|
|
What is the "Specials deck" publication number?
|
A1-H60CA-MRC-350
|
|
|
What is the "conditionals deck" publication number?
|
A1-H60CA-MRC-390
|
|
|
What are the limitations on the viscous dampers?
|
0-1 inches is acceptable 1-2 inches is serviceable 2+ replace viscous damper
|
|
|
Prior to applying electrical power to the aircraft, what circuit breakers must be closed?
|
BATT BUS CONTR, WT ON WHEELS, BATT BUS SPLY
|
|
|
What do you check the attenuator for?
|
Cracks, dents, extension, and missing hardware.
|
|
|
What does LEMA Stand for and what are you looking for on it?
|
Linear electromechanical actuator, damage and security and 1/32 inch to 5/32 inch LEMA to bell crank clearance
|
|
|
What is the part number for aircraft cleaning compound?
|
MIL-PRF-85570 type II
|
|
|
What do you wipe all exposed piston rods of tail rotor servo with?
|
Low-lint cloth, dampened with hydraulic fluid (MIL-PRF-83282)
|
|
|
What position should the inertia reel control handle be in?
|
AFT
|
|
|
What will the waveguide reservoir bottles read when empty and full?
|
50PSIG when empty and 700-800PSIG when full
|
|
|
What does IFF stand for and what are you looking for on it?
|
Identification friend or foe, looking for attaching hardware and security
|
|
|
What is the definition of a "warning"
|
Refers to a procedure or practice that, if not followed, could result in injury, death, or health hazard.
|
|
|
What IRAC's have been incorporated into the daily deck and what IRAC's have been cancelled?
|
Incorporated 38-45... Cancelled IRAC's 41 and 44
|
|
|
What IRAC's have been incorporated into the daily deck and what IRAC's have been cancelled?
|
Incorporated 38-45... Cancelled IRAC's 41 and 44
|
|
|
What IRAC's have been incorporated into the daily deck and what IRAC's have been cancelled?
|
Incorporated 38-45... Cancelled IRAC's 41 and 44
|
|
|
How do you test the ADHEELS/IHEELS systems?
|
Press and hold the remote test switch for 3-8 seconds , ensure ADHEELS light strip illuminates, then release switch.
|
|
|
What is the damage limits of the Teflon guides?
|
Damage deeper than depth of attach rivet head, damage over 20% of the total surface area, attach rivets that are flush with the guide surface
|
|
|
What is the damage limits of the Teflon guides?
|
Damage deeper than depth of attach rivet head, damage over 20% of the total surface area, attach rivets that are flush with the guide surface
|
|
|
What IRAC's have been incorporated into the daily deck and what IRAC's have been cancelled?
|
Incorporated 38-45... Cancelled IRAC's 41 and 44
|
|
|
How do you test the ADHEELS/IHEELS systems?
|
Press and hold the remote test switch for 3-8 seconds , ensure ADHEELS light strip illuminates, then release switch.
|
|
|
Why do you not open the gravity refuel cap?
|
Fuel level may be above height of cap and fuel will be released if cap is opened
|
|
|
What IRAC's have been incorporated into the daily deck and what IRAC's have been cancelled?
|
Incorporated 38-45... Cancelled IRAC's 41 and 44
|
|
|
How do you test the ADHEELS/IHEELS systems?
|
Press and hold the remote test switch for 3-8 seconds , ensure ADHEELS light strip illuminates, then release switch.
|
|
|
What is the damage limits of the Teflon guides?
|
Damage deeper than depth of attach rivet head, damage over 20% of the total surface area, attach rivets that are flush with the guide surface
|
|
|
Why do you not open the gravity refuel cap?
|
Fuel level may be above height of cap and fuel will be released if cap is opened
|
|
|
What do you wipe the transition section bilges ?
|
Wipe dry accumulated moisture with cleaning cloth
|
|
|
How do you test the ADHEELS/IHEELS systems?
|
Press and hold the remote test switch for 3-8 seconds , ensure ADHEELS light strip illuminates, then release switch.
|
|
|
What is the damage limits of the Teflon guides?
|
Damage deeper than depth of attach rivet head, damage over 20% of the total surface area, attach rivets that are flush with the guide surface
|
|
|
Why do you not open the gravity refuel cap?
|
Fuel level may be above height of cap and fuel will be released if cap is opened
|
|
|
What do you wipe the transition section bilges ?
|
Wipe dry accumulated moisture with cleaning cloth
|
|
|
What is the limits of the dehydrator kit?
|
It is contaminated when less than 10% of the desiccant indicator beads are blue
|
|
|
What do you look for on the mixer assembly output levers and bell cranks?
|
Cracking, deformation, or cocking
|
|
|
On what boost servos do you do the fracture inspection?
|
Yaw and collective
|
|
|
What color stain appears below the LDS/PAS if there is leakage?
|
Dark stain
|
|
|
What color stain appears below the LDS/PAS if there is leakage?
|
Dark stain
|
|
|
What does HMU stand for?
|
Hydro mechanical control unit
|
|
|
What does HMU stand for?
|
Hydro mechanical control unit
|
|
|
What are you looking for on the deswirl duct and deswirl clamp ?
|
Security
|
|
|
What are you looking for on the deswirl duct and deswirl clamp ?
|
Security
|
|
|
What are you looking for on the engine direct feed hose?
|
Chafing, leakage, evidence of fuel stain, or other damage.
|
|
|
What are you looking for on the engine direct feed hose?
|
Chafing, leakage, evidence of fuel stain, or other damage.
|
|
|
What do you look for on the axis-A lube nozzle self locking nut?
|
Verify presence and security
|
|
|
What do you look for on the axis-A lube nozzle self locking nut?
|
Verify presence and security
|
|
|
What is the Max load of the engine door work platform?
|
1 man or 300lbs
|
|
|
What is the Max load of the engine door work platform?
|
1 man or 300lbs
|
|
|
When do you use a flash light with a red lens and what is the process?
|
To check the engine and APU fire detectors. One person flashes the red lensed flash light at the fire detector and another is in the cabin with the battery power on, the master warning FIRE light will go on
|
|
|
What do you check on the air cycle machine?
|
Proper oil level
|
|
|
What are you looking for on the #1 and #2 fuel selector valves?
|
Evidence of leakage
|
|
|
What does PCL stand for?
|
Pitch control link
|
|
|
What type of grease is used on the bifilar assembly?
|
630-AA (lubri-plate)
|
|
|
What does BIM stand for?
|
Blade inspection method
|
|
|
What is the correct tire pressure for a Sierra?
|
130-140 PSI
|
|
|
Does the requirements of a daily inspection satisfy the requirements of a turn around?
|
No
|
|
|
What circuit must be pushed in before applying external power?
|
BATT BUS, WEIGHT ON WHEELS, BATT BUS SUPPLY
|
|
|
What circuit must be pushed in before applying external power?
|
BATT BUS, WEIGHT ON WHEELS, BATT BUS SUPPLY
|
|
|
What does ELT stand for and what are you looking for on it?
|
Security, water intrusion, and switch position (arm)
|
|
|
What does ELT stand for and what are you looking for on it?
|
Security, water intrusion, and switch position (arm)
|
|
|
What is the rotor brake master cylinder gage pressure limits?
|
450-690 PSI
|
|
|
What are you looking for on the bottom wire strike?
|
Obstructions, looseness and security.
|
|
|
What are you looking for on the bottom wire strike?
|
Obstructions, looseness and security.
|
|
|
If the auxiliary tanks are not installed and the electrical connector is not connected to the upper shorting plug, what happens?
|
Erroneous fuel reading could result
|
|
|
What do you look for on the No.1 LDS cable?
|
Proper paint stripe, roll pin/ safety site for security
|
|
|
How long do you wait for before checking the engine oil level after shutdown?
|
20 minutes
|
|
|
How long do you wait before checking APU oil level after aircraft shutdown?
|
1 hour
|
|
|
What steps must you wait to complete if the aircraft is folded?
|
Main rotor lock pin pullers, IGB and TGB
|
|
|
When servicing an engine, where on the sight glass do you service to?
|
Top two bolts
|
|
|
Who is responsible for overseeing the execution of the daily flight schedule?
|
Squadron duty officer (SDO)
|
|
|
No less than _____ LBS of fuel is required in the aircraft for final landing
|
600 LBS
|
|
|
Are passengers allowed to occupy the aircraft while hot refueling?
|
No, but aircrewman if embarked shall monitor refueling operations
|
|
|
What should the sonobuoy launcher be serviced to a minimum of anytime sonobuoys are to be loaded for flight?
|
1200-1250 PSI
|
|
|
When is single hearing protection required?
|
Within 200 feet of aircraft with rotors turning or within 50 feet of aircraft with only APU running.
|
|
|
When is double hearing protection required?
|
Within 30 feet of rotors turning or APU running for an extended period of time
|
|
|
When is double hearing protection required?
|
Within 30 feet of rotors turning or APU running for an extended period of time
|
|
|
When are cranial allowed to be relaxed when working on the aircraft?
|
Only when headgear restricts proper accomplishment of the task
|
|
|
When is double hearing protection required?
|
Within 30 feet of rotors turning or APU running for an extended period of time
|
|
|
When are cranial allowed to be relaxed when working on the aircraft?
|
Only when headgear restricts proper accomplishment of the task
|
|
|
What is the maximum number of unfastened, broken, or missing fastners on tail gearbox?
|
2 in a row, or 3 total
|
|
|
What chapter is used most as plane captains in the NATOPS manual?
|
Chapter 3
|
|
|
What is the MIL spec for engine oil?
|
MIL-PRF-23699
|
|
|
What is the MIL spec for hydraulic fluid?
|
MIL-PRF-83282
|
|
|
What is the MIL spec for hydraulic fluid?
|
MIL-PRF-83282
|
|
|
What is the MIL spec for gear box oil?
|
MIL-PRF-85734 or DOD-PRF-85734
|
|
|
What is the NATO code for JP-8?
|
f-34
|
|
|
What is the MIL spec for hydraulic fluid?
|
MIL-PRF-83282
|
|
|
What is the MIL spec for gear box oil?
|
MIL-PRF-85734 or DOD-PRF-85734
|
|
|
What is the NATO code for JP-8?
|
f-34
|
|
|
How much does one gallon of JP-4 weigh?
|
6.5 LBS
|
|
|
What is the minimum flash point of fuel while aboard ships?
|
120 degrees F
|
|
|
What is the MIL spec for hydraulic fluid?
|
MIL-PRF-83282
|
|
|
What is the MIL spec for gear box oil?
|
MIL-PRF-85734 or DOD-PRF-85734
|
|
|
What is the NATO code for JP-8?
|
f-34
|
|
|
How much does one gallon of JP-4 weigh?
|
6.5 LBS
|
|
|
What is the minimum flash point of fuel while aboard ships?
|
120 degrees F
|
|
|
What is the definition of a restricted fuel?
|
A fuel which imposes operational restrictions on the aircraft. These fuels may be used only if no primary military or commercial fuels are available
|
|
|
Can an aircraft be refueled if a pre-check valve is bad?
|
Yes as long as there is one operative pre-check valve
|
|
|
Can an aircraft be refueled if a pre-check valve is bad?
|
Yes as long as there is one operative pre-check valve
|
|
|
When the oil level decreases to the ADD mark on the dipstick, approximately how many quarts of oil will be needed to return the level to FULL?
|
2 quarts
|
|
|
Can an aircraft be refueled if a pre-check valve is bad?
|
Yes as long as there is one operative pre-check valve
|
|
|
When the oil level decreases to the ADD mark on the dipstick, approximately how many quarts of oil will be needed to return the level to FULL?
|
2 quarts
|
|
|
How many chains are required for HEAVY WEATHER tie down?
|
18 tie downs (3 on each attachment point)
|
|
|
What is the mix ratio of water to soap in a "heavy" wash job?
|
1 part aircraft cleaning compound to 1 part fresh water
|
|
|
What does IETM stand for?
|
Interactive electronic technical manual
|
|
|
Can an aircraft be refueled if a pre-check valve is bad?
|
Yes as long as there is one operative pre-check valve
|
|
|
When the oil level decreases to the ADD mark on the dipstick, approximately how many quarts of oil will be needed to return the level to FULL?
|
2 quarts
|
|
|
How many chains are required for HEAVY WEATHER tie down?
|
18 tie downs (3 on each attachment point)
|
|
|
What is the mix ratio of water to soap in a "heavy" wash job?
|
1 part aircraft cleaning compound to 1 part fresh water
|
|
|
What does IETM stand for?
|
Interactive electronic technical manual
|
|
|
What is the maximum towing speed of an aircraft ?
|
5 MPH
|
|
|
How far will an aircraft move after an unanticipated stop signal is given?
|
6-9 feet
|
|
|
When do you ensure that the tail wheel lock pin is in the raised position?
|
When parked
|
|
|
How many knots of wind are you not supposed to fold the tail?
|
45 knots
|
|
|
Can an aircraft be refueled if a pre-check valve is bad?
|
Yes as long as there is one operative pre-check valve
|
|
|
In what order do you secure the blades while folded?
|
Red, black, blue, yellow
|
|
|
When the oil level decreases to the ADD mark on the dipstick, approximately how many quarts of oil will be needed to return the level to FULL?
|
2 quarts
|
|
|
How many chains are required for HEAVY WEATHER tie down?
|
18 tie downs (3 on each attachment point)
|
|
|
What is the mix ratio of water to soap in a "heavy" wash job?
|
1 part aircraft cleaning compound to 1 part fresh water
|
|
|
What does IETM stand for?
|
Interactive electronic technical manual
|
|
|
What is the maximum towing speed of an aircraft ?
|
5 MPH
|
|
|
How far will an aircraft move after an unanticipated stop signal is given?
|
6-9 feet
|
|
|
When do you ensure that the tail wheel lock pin is in the raised position?
|
When parked
|
|
|
How many knots of wind are you not supposed to fold the tail?
|
45 knots
|
|
|
What is the length of the aircraft while it is folded ?
|
40 feet 11 inches
|
