Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
True or False: A voltage tester is a good tool for determining the exact voltage from a power source. |
False: It can only tell approx. what it is |
|
True or False: It is alright to use a voltage tester with cracked insulation is you are careful? |
False |
|
What is the purpose of a voltage tester? |
To find out if there is power available to run a piece of equipment |
|
How can voltage testers burn out? |
By being left on a running piece of equipment for too long. |
|
State 2 ways meters are classified: |
1. The electrical quantity a meter is designed to measure (Volts, Amps, Ohms) 2. The type of circuit (AC or DC) |
|
What does an ammeter measure? |
Current |
|
True or False: Multiplying resistors allow a meter to measure different current ranges |
False |
|
How many positions are on a function switch? |
3 -- one for AC measurements, two for DC measurements |
|
What is the purpose of the zero ohms knob on a multimeter? |
To zero the needle for resistance readings |
|
True or False: Current ranges on most multimeters are relatively small. |
True |
|
When a multimeter is used to measure DC current, the meter is connected __________ with the circuit. |
In series |
|
What is the main factor that can affect insulation resistance? |
Age |
|
True or False: Multiplying resistors allows a meter to measure different current ranges |
False |