Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
41 Cards in this Set
- Front
- Back
configure terminal
|
enters global configuration mode from privileged EXEC mode
|
|
disable
|
returns to user EXEC mode from privileged EXEC mode
|
|
enable
|
enters privileged EXEC mode from user EXEC mode
|
|
enable password [password]
|
sets the enable password
|
|
enable secret [password]
|
sets the enable secret password (overrides [enable password]
|
|
hostname [host-name]
|
sets the device name
|
|
line console 0
|
accesses console line 0 configuration mode (also; vty & aux lines)
|
|
login
|
enables password checking
|
|
password [password]
|
specifies the password that is required for a user to log in
|
|
show running-config
|
displays the contents of the active configuration file
|
|
banner login [delimiting-character message delimiting-character]
|
configures a message that is displayed at user login attempts
|
|
banner motd [delimiting-character message delimiting-character]
|
configures a message-of-the-day (MOTD) banner that can be used to display a message at user login attempts
|
|
line vty 0 4
|
enters configuration mode for virtual terminal (Telnet) lines
|
|
login local
|
defines the use of local usernames, replacing the login subcommand in vty configuration mode
|
|
service password-encryption
|
applies encryption to all current and future passwords configured on the device
|
|
show interfaces [type number]
|
displays statistics for all interfaces configured on the router
|
|
show ip interface brief
|
displays a brief summary of interface status and configuration
|
|
show terminal
|
displays the current terminal settings
|
|
show version
|
displays hardware platform and software versions
|
|
copy running-config startup-config
|
saves the configuration file
|
|
reload
|
reboots the router
|
|
show startup-config
|
displays the backup configuration file
|
|
cdp enable
|
enables CDP on an interface; the word "no" prefixed to the command disables CDP on an interface
|
|
ip address [ip-address] [subnet-mask]
|
assigns an IP address to an interface
|
|
no shutdown
|
enables an interface
|
|
show cdp
|
displays global CDP information, including timer and hold-time information
|
|
show cdp neighbors
|
displays information about directly connected neighbors
|
|
show ip interface
|
displays IP information for an interface
|
|
CTRL+SHIFT+6 X
|
suspend current telnet session (also resumes previous session)
|
|
enable password level [level] [password]
|
sets the enable password on a switch with a level for which the password applies
|
|
enable secret level [level] [password]
|
sets the enable secret password on a switch with an optional level for which the password applies
|
|
shutdown / no shutdown
|
disables an interface / enables an interface
|
|
show mac-address-table
|
displays the Media Access Control (MAC) forwarding table
|
|
ip default-gateway [ip-address]
|
configures a default gateway IP address to which traffic destined to remote networks will be forwarded
|
|
show interfaces status
|
displays the line status of all interfaces
|
|
copy running-config [startup-config] | [tftp] | [device:filename]
|
copies a device’s running configuration file to another destination
|
|
copy tftp [running-config] | [startup-config] | [device:filename]
|
copies a file from a TFTP server to another destination
|
|
show ip route
|
displays the IP routing table
|
|
Router>
|
User EXEC
|
|
Router>#
|
Privileged EXEC
|
|
Router(config)#
|
Global config
|