Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
6 Cards in this Set
- Front
- Back
The threads of drainage fittings shall be tapped as to allow blank per foot grade |
1/4 inch per foot grade 701. 3.2 threads |
|
Does an expansion joint need to be accessible if used in a vent or in a drainage stack |
705.8 point to Expansion Joints. No- |
|
What is the minimum thickness for a lead safe pan |
7015 lead (1) not less than four pounds per foot or 1/16 of an inch |
|
Fittings used for drainage Shelby of the blank type have a blank blank blank and be so constructed as to allow blank grade |
701. 3.3 type. Drainage type have a smooth interior Waterway and be so constructed as to allow 1/4 in of grade. |
|
Define copper alloy |
Chapter two definitions a homogeneous mixture of two or more Metals in which copper is the primary components such as brass or bronze |
|
Galvanized pipe can be installed Underground |
701.2 drainage piping Section 1 no galvanized rod iron or galvanized steel pipe shall be used underground and kept not less than 6 in above ground |