Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
22 Cards in this Set
- Front
- Back
Refer to the exhibit. Assuming that the network in the exhibit is converged meaning the routing tables and ARP tables are complete, which MAC address will Host A place in the destination address field of Ethernet frames destined for www.server?
|
00-0c-85-cf-65-c0
|
|
Which options are properties of contention-based media access for a shared media? (Choose three.)
|
non-deterministic
less overhead collisions exist |
|
What is true concerning physical and logical topologies?
|
Logical topologies consist of virtual connections between nodes.
|
|
What determines the method of media access control? (Choose two.)
|
media sharing
logical topology |
|
What is true regarding media access control? (Choose three.)
|
Ethernet utilizes CSMA/CD
defined as placement of data frames on the media Data Link layer protocols define the rules for access to different media |
|
Which statements describe the logical token-passing topology? (Choose two.)
|
Computers are allowed to transmit data only when they possess a token.
Electronic tokens are passed sequentially to each other. |
|
A network administrator has been asked to provide a graphic representation of exactly where the company network wiring and equipment are located in the building. What is this type of drawing?
|
physical topology
|
|
A network administrator has been asked to provide a graphic representation of exactly where the company network wiring and equipment are located in the building. What is this type of drawing?
|
physical topology
|
|
What is the purpose of the preamble in an Ethernet frame?
|
is used for timing synchronization
|
|
What is the purpose of the preamble in an Ethernet frame?
|
is used for timing synchronization
|
|
What statements are true regarding addresses found at each layer of the OSI model? (Choose two.)
|
Layer 2 may identify devices by a physical address burned into the network card
Layer 3 represents a hierarchical addressing scheme |
|
What statements are true regarding addresses found at each layer of the OSI model? (Choose two.)
|
Layer 2 may identify devices by a physical address burned into the network card
Layer 3 represents a hierarchical addressing scheme |
|
Refer to the exhibit. Which statement describes the media access control methods that are used by the networks in the exhibit?
|
Network 1 uses CSMA/CD and Network 3 uses CSMA/CA.
|
|
Refer to the exhibit. How many CRC calculations will take place as traffic routes from the PC to the laptop?
|
8
|
|
Refer to the exhibit. A frame is being sent from the PC to the laptop. Which source MAC and IP addresses will be included in the frame as it leaves RouterB? (Choose two.)
|
source MAC – Fa0/1 on RouterB
source IP – PC |
|
Which sublayer of the data link layer prepares a signal to be transmitted at the physical layer?
|
MAC
|
|
What two facts are true when a device is moved from one network or subnet to another? (Choose two.)
|
The device will still operate at the same Layer 2 address.
The Layer 3 address must be reassigned to allow communications to the new network. |
|
What is a function of the data link layer?
|
provides for the exchange data over a common local media
|
|
What is a characteristic of a logical point-to-point topology?
|
The media access control protocol can be very simple.
|
|
What is a primary purpose of encapsulating packets into frames?
|
facilitate the entry and exit of data on media
|
|
What is the primary purpose of the trailer in a data link layer frame?
|
support frame error detection
|
|
What are three characteristics of valid Ethernet Layer 2 addresses? (Choose three.)
|
They are 48 binary bits in length.
They are considered physical a addresses. They are generally represented in hexadecimal format. |