Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
12 Cards in this Set
- Front
- Back
What is the main purpose of the FOD control program?
|
To provide accountability
|
|
What minimum marking(s) should be etched on each tool?
A. Tool container # B. Work center C. Tool container #, work center and Organization code D. Item # |
C
|
|
Which of the following tools is not considered a common hand tool?
A. wrench B. hacksaw C. drill press D. hand drill |
D
|
|
A 6-point socket has an advantage over the 12-point socket because it is not subject to as much wear when used on stainless steel nuts.
True or False |
True
|
|
Sockets are classified according to thier
A. drive size and the size of the opening at the wrench end B. drive size and depth C. length and depth |
A
|
|
The bolt size of sockets is graduated in increments of
A. 1/16 inch B. 3/8 inch C. 1/4 inch d. 1/8 inch |
A
|
|
The size of the common screwdriver is determined by which of the following features?
A. length of the shank B. width of the blade C. A and B D. size of the handle |
C
|
|
AN bolts come in what total number of head styles?
A. 5 B. 2 C. 3 D. 4 |
C
|
|
What are the two general types of self-locking nuts?
A. Boots and flexloc B. stop and nonstop C. all-metal and nonmetallic insert D. flexloc and nonmetallic insert |
C
|
|
What are the general classes of washers used in aircraft structures?
|
Plain, Lock and special
|
|
Three bolts is the maximum # that should be safety wired in one series.
True or false |
True
|
|
How many twists should be in a pigtail one half inch long?
A. 5 B. 6 C. 3 D. 4 |
B
|