Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
29 Cards in this Set
- Front
- Back
What does the Aircraft elevator operational test prove? |
All areas are functional |
|
When is an operational test required? |
30 days no use, repair of major components and replacement of major components |
|
How many cycles of the Aircraft Elevator are required for a typical operational test? |
Five |
|
How long is the ACE test good for after Class B overhaul? |
1 hour |
|
How often do you inspect ACE |
Daily Prior to use |
|
After ACE inspection where do you record discrepancies? |
Ships Maintenance Action form 4790-2 K |
|
Typical operational test consist raising and lowering platform with no load through how many cycles and what speed? |
Five complete cycles - two at slow speed - three at rated speed |
|
Overhaul class A? |
Modifications, Repair and ship changes. Altered to meet the ”most recent” design and technical specifications. |
|
Overhaul class B |
Work that will restore the operating and performance characteristics of a system and subsystem. |
|
Overhaul Class C |
Repair to systems specified by the work request or correct particular deficiencies |
|
Overhaul Class D |
Open, inspect and report type of work request. |
|
Overhaul class E |
Required to incorporate all ship changes specified for designated systems |
|
form Requesting outside activity support due to repair beyond ships capacity? |
Ships maintenance action form 4790/2K or Automated Work Request (AWR) OPNAV 4790/2R |
|
Repairs within the ships force capacity are added to what log? |
Ships Force Work Log (SFWL) |
|
Ships maintenance action form OPNAV Form 4790-2 K is used for report? |
Deferred Maintenance that do not result in a configuration change. |
|
How many sections are there in the SDS? |
16 1. Identification 2. Composition 3. Hazards 4. First Aid 5. Fire Fighting measured 6. Accidental Release Measures 7. Handling and Storage 8. Exposure Control/Personal Protection 9. Physical and Chemical properties 10. Stability and Reactivity 11. Toxicological info Next five are not mandatory. |
|
Hydraulic Fluid is listed in what group of the HMUG Afloat? |
12 |
|
When should hearing protection be required for wear? |
Whenever entering designated hazardous noise areas. |
|
What qualifies environment to be noise hazard and require hearing protection? |
Area with noise level greater than 84 Decibels and requires hearing protection |
|
Double hearing protection is required when? |
Noise level is greater than 104 decibels |
|
MRC A-13R |
Pre-operational inspections/ test and conduct SOT |
|
What MIP is used for prep operation inspection? |
5881/001 elevator Aircraft |
|
OPNAVINST 5100.19 series? |
Afloat |
|
OPNAVINST 5100.23 series |
Shore |
|
Main control valve should indicate? |
0 and 5/8” up/down position |
|
If the platform is at the flight deck the main control valve spool must be at? |
1/2” to 5/8” to the up position. |
|
If the platform is in the hanger deck the Main Control Valve Spool should be? |
1/2” to 5/8” down position |
|
Exhaust, tank fluid pressure |
75 to 95 PSIG Minimum 100 to 140 PSIG Maximum |
|
HP accumulator charge time? |
Less than 70 seconds |