Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
9 Cards in this Set
- Front
- Back
What does pulling an Engine FIRE handle do? |
Arms Fire Extinguisher bottles Silences bell Hydraulic shutoff Eng Fuel valve closes Spar valve closes
Generator field trips and breaker Bleed Air |
|
What kind of fire Detection system do the engines have? |
Dual loop and... Both loops must detect a fire for a fire indication to occur. |
|
Pulling the APU fire handle will do what? |
-Arms fire ext bottle(s) -Silences fire bell -Closes APU fuel SOV -Trips APU gen breaker -Closes bleed valve -Commands shut down(ECU should command it automatically for FIRE) |
|
How long will fire suppression last for cargo fires? |
-195min -30min for first bottle, 150min for second metered bottle -additional 15min on last bottle |
|
What kind of detection do we have in the main wheel well? |
Single loop detection |
|
What kind of fire detection or protection do we have in the Lavatory? |
A fire extinguisher with a wax tip that will extinguish fires in the lab trash bin. Smoke detectors notify the cabin crew panel. |
|
If a FAIL P-RESET shows on the FIRE/OVHT TEST panel, what should we do? |
Consult the QRH non-normal procedure, and it should tell us to reset the system to continued monitoring can occur. We should know that some fire equipment may not work. |
|
When you rotate an engine fire switch, what happens? How can you tell? |
-Discharges bottle into engine -ENG BTL DISCH -EICAS message ENG BTL |
|
Pushing a cargo FIRE switch will do what actions? |
Arm cargo fire extinguishers Silence fire bell RECIRC fans OFF NGS shuts off Cargo Heat valves close PACKs will go to: FWD: High flow AFT/Bulk: Low flow forced |