Work Holding And Setup

Front 1

Just ensuring the milling machine table is clean and free of chips and burrs will ensure proper clamping of the work piece or vise.

Back 1

False

Front 2

Brasses and bronze materials are ideal candidates for magnetic fixturing.

Back 2

False

Front 3

Before cutting chips during a machining process, the work piece must be fastened to the machines table or located properly in a vise.

Back 3

True

Front 4

To seat a part into a vise, use a

Back 4

dead blow hammer

Front 5

The working end of an edge finder is typically either .300" or .500" in diameter.

Back 5

False

Front 6

Usually, when aligning a vise, you mount a _____ in the machine spindle to check.

Back 6

dial indicator

Front 7

The edge finder is used to give a digital read out of the location of the edge.

Back 7

False

Front 8

It is possible to have a work piece cut parallel but not square but not square without being parallel.

Back 8

True

Front 9

One of the most important aspects of work piece set-up is learning to machine

Back 9

square and parallel

Front 10

A 3" x 4" work piece has a vacuum holding force of ____ lbs. of force

Back 10

176

Front 11

When machining a work piece square and parallel, you want to machine the _____ side up to be machined first.

Back 11

largest

Front 12

This type of work piece fixturing methods main disadvantage is being in the way of moving parts of the machine

Back 12

clamps

Front 13

Without proper set-up, which of the following will not happen

Back 13

climb milling across the work piece

Front 14

Adhesives work holding technique is quick, cheap, and clean-up is easy.

Back 14

False

Front 15

Work piece set-up is the shortest process during production machining and part changeovers.

Back 15

False

Front 16

Alignment of the vise with the longitudinal travel of the machine is also called

Back 16

squaring

Front 17

It is important to tell the CNC machine how you have secured the part.

Back 17

False