Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
6 Cards in this Set
- Front
- Back
Question: 1 In the current RF environment, the noise floor is -95dBm. A tablet needs an SNR of 25 dB to transmit at the required speed. Whatmust the RSSI cell edge be to meet the required SNR? |
A. -120 dBm B. -90 dBm C. -70 dBm D. -60 dBm E. -50 dBm Answer:C |
|
Question:2 An access pointis currently transmitting at 4 mW. The customer needs to increase its signalstrength by 6 dB to create a larger wireless cell. What should the new transmitpower be? |
A. 8 mW B. 10 mW C. 12 mW D. 16 mW E. 24 mW
Answer: D |
|
Question:3 |
A. IEEE B. FCC C. ITU-R D. ETSI E. Wi-FiAlliance Answer:B, D |
|
Question:4 After installinga Cisco 5508 Wireless Controller using the default settings, how often will theRRM update occur? |
A. 30 seconds B. 60 seconds C. 300 seconds D. 600 seconds E. 3600 seconds F. 7200 seconds Answer:D |
|
Question:5 A customer hasrequested a single point of policy enforcement for LAN and WLAN. Whichdeployment model should be used? |
A. converged B. autonomous C.FlexConnect D. centralized Answer:A |
|
Question:6 Acustomer has asked for the proper port configuration to allow for LAG on aCisco 2504 Wireless Controller to a Cisco IOS switch. Which EtherChannel modeshould be used on the switch to allow for the WLC to connect? |
A. on B. auto C. desirable D. passive E. active Answer: A |