Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
53 Cards in this Set
- Front
- Back
Chemical or substance applied in finishing carpentry. |
Finishing Material |
|
Metal supplies used in furniture. |
Hardware |
|
The accounting of tools and materials. |
Inventory |
|
Refers to the indicated name of tools and equipment. |
Label |
|
Oils or grease which is use to help the machine to run smoothly. |
Lubricants |
|
The act or art of measuring. |
Mensuration |
|
The bounding line or curve of a plain area. |
Perimeter |
|
Handy machines operated by current/electricity. |
Power tools |
|
Marked for use in measurement. |
Scaler |
|
Set aside things from the others. |
Segregate |
|
Serves as a measure of reference. |
Standard |
|
Refers to a lumber for a certain carpentry job. |
Stock |
|
To put tools and materials in their proper places. |
Store |
|
Wood to be cut in a cutting machine. |
Substrate |
|
What are the classification of handtools? |
Measuring tools Marking lining tools Testing tools Edge cutting tools Tooth-cutting tools Boring tools Holding tools Miscellaneuos tools Portable power tools Personal Protective Equipment Driving tools |
|
What are the tools in Measuring tools? |
Pull-push rule Ruler Meter stick Try square Caliper |
|
What are the tools in Marking Lining tools? |
Pencil Marking gauge Chalk line Divider Compass |
|
What are the tools in Testing tools? |
Try square Steel square Spirit level Plumb-bob |
|
What are the tools in Edge cutting tool? |
Chisel Plane Smoke shave Cabinet scraper |
|
Flexible tape that slides into a material case and it is used to measure irregular and regular shapes. |
Pull-push rule |
|
12-inch or one foot rule and it is used to take/make simple measurements. |
Ruler |
|
Used to measure a work piece. |
Meter stick |
|
Squaring, measuring and testing tool used to check adjacent surfaces for squareness. |
Try square |
|
Used to transfer measurements from the rule to the work. |
Calliper |
|
Used to layout or mark cutting lines. |
Pencil |
|
Wood or metal tool consisting of a beam, head and a point used to mark a line parallel to the grain of the wood. |
Marking gauge |
|
Used to establish a straight line on a surface. |
Chalk line |
|
Tool with two metal legs used to lay-out an arc circle or step off division on a line. |
Divider |
|
Used to scribe arcs and circle in a metal wood. |
Compass |
|
Tool used in squaring, measuring and testing the squareness of a wood. |
Try square |
|
Framing square used to mark out the work for squaring and checking of angles and is used in the construction of roof framing and large furniture. |
Steel square |
|
Tool used for testing vertical and horizontal surfaces. |
Spirit level |
|
Tool used to test the vertical and horizontal surfaces. |
Plumb-bob |
|
Tool used to trim and shape wood. |
Chisel |
|
Used to obtain a smooth and flat surface. |
Plane |
|
Small plane like tool from irregularly shaped objects. |
Spoke shave |
|
Rectangular piece of steel with two cutting edges used for working flat and curved shapes. |
Cabinet scraper |
|
Handsaw used to cut the wood across the grain. |
Cross-cut saw |
|
Hand saw used to cut the wood along the grain. |
Rip-saw |
|
Handsaw with a metal back and plywood and joinery. |
Back saw |
|
Used to cut irregular shape either in large or small board. |
Compass saw |
|
Used to rip, cross and cut curves in lumber. |
Turning saw |
|
U-shaped saw used for cutting irregular shape in small board. |
Coping saw |
|
Small back saw with a straight chisel type handle used to cut very fine joints. |
Dovetail saw |
|
Tool used to make hole in woods. |
Auger Bit |
|
Tool used to drill holes of various sizes in woods. |
Expansive Bit |
|
Tool used for boring holes either in metals, woods or plastics. |
Drill Bit |
|
Used for holding together pieces of lumber while working. |
C-Clamp |
|
Used to hold any materials or tools in place. |
Bench vise |
|
Used to hold large boards or frames together while assembling or gluing. |
Bar clamp |
|
Used for sharpening edge cutting tools such as chisel. |
Oil stone |
|
Used to smoothen metal and wood surfaces. |
Files |
|
Used to apply paint or varnish on wood surfaces. |
Paint brush |