• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/14

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

14 Cards in this Set

  • Front
  • Back

Tell me how you’d check that the brakes are working before starting a journey

Brakes should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side

Tell me where you’d find the information for the recommended tyre pressures for this car and how tyre pressures should be checked

Manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don’t forget spare tyre, remember to refit valve caps

Tell me how you make sure your head restraint is correctly adjusted so it provides the best protection in the event of a crash

The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable

Tell me how you’d check the tyres to ensure that they have sufficient tread depth and that their general condition is safe to use on the road

No cuts and bulges, 1.6mm of tread depth across the central three-quarters of the breadth of the tyre, and around the entire outer circumference of the tyre.

Tell me how you’d check that the headlights and tail lights are working. You don’t need to exit the vehicle

Explain that you’d operate the switch (turn on ignition if necessary), then walk round vehicle to check

Tell me how you’d know if there was a problem with your anti-lock braking system

Warning light should light up if there is a fault with the anti-lock braking system

Tell me how you’d check the direction indicators are working. You don’t need to exit the vehicle

Explain you’d operate the switch (turn on ignition if necessary), and then walk round vehicle to check

Tell me how you’d check the brake lights are working on this car

Explain you’d operate the brake pedal, make use of reflections in windows or doors, or ask someone to help check

Tell me how you’d check the power-assisted steering is working before starting a journey

When turning the steering wheel it should not feel heavy

Tell me how you’d switch on the rear fog light(s) and explain when you’d use them

Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain you would use them when in foggy or low visibility conditions

Tell me how you switch your headlight from dipped to main beam and explain how you’d know the main beam is on

Operate switch (with ignition or engine on if necessary), check with main beam warning light

Show me how you'd open the bonnet and how you’d check that the engine has sufficient oil

Identify dipstick/oil level indicator, compare oil level against the minimum and maximum markers

Show me how you'd open the bonnet and how you’d check that the engine has sufficient engine coolant

Identify high and low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level

Show me how you'd open the bonnet and how you’d check that you have a safe level of hydraulic brake fluid

Identify reservoir, check level against high and low markings