Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
You must make each component of the tires, brakes and suspension at each axle set to receive credit for those item.The |
You must make each component of the tires, brakes and suspension at each axle set to receive credit for those item.The |
|
Side teflector light |
The light is a marker, blinker, flasher light. It is properly mounted and secure. All nuts and bolts are present and tight. It's not damaged. And it's Amber in color. |
|
side mirror |
the side mirror is properly mounted and secure. All nuts and bolts are present and tight. It is not damaged. And the mirror is clean. |
|
door |
The door open and closes is properly mounted and secure. All nuts and bolts are present and tight. Noting is cracked, bent or broken. |
|
Steps |
The steps are properly mounted and secure. They are free of debris. |
|
battery compartment |
The battery compartment is properly mounted and secure. All nuts and bolts are present and tight. It's not damaged. The battery is not leaking |
|
fuel tank |
the fuel tank is properly mounted it is secured by 2 metal strips with rubber dampeners that prevent the medal touching medal. It is properly grounded and vented. All nuts and bolts are present and tight. It is not damaged. The cap has a rubber gasket and it has no damage and it has been hand tightened, the system is not be leaking. |
|
catwalk |
The catwalk steps are properly mounted and secure. The steps are free of debris. |
|
lights and reflectors |
The lights and reflectors are properly mounted and secure. All nuts and bolts are present and tight. And they are clean. |
|
air lines |
The air lines are properly mounted and secure. They'er not touching the deck. They're no damagaed. The glad hand nuts and bolts are present and tight.The rubber seal is properly mounted and secure there is no damage and or debris inside the glad hand hole. It's not leaking |
|
electrical cord |
the electrical cord is properly mounted and secure and not touching the deck. The cord is soft and pliable, and the rubber seal has no ABC or dry rot. |
|
frame |
The frame and the cross member are properly mounted and secure. All of the nuts and bolts are present and tight. It is not cracked, bent broken or twisted.( The frame can't be drilled or welded, if this happens the tractor well not pass a DOT inspection.) |
|
drive shaft |
The drive shaft is properly mounted and secure. All nuts and bolts are present and tight. It's not cracked, bent, broken or twisted. ( it has 3 shafts the front, intermediate and the rear.) |
|
exhaust |
The exhaust is properly mounted and secure. All nuts and bolts are present and tight. It's not damaged. It's not leaking and has no dirt or soot trails. |
|
The fifth wheel area |
Is the whole area over all |
|
Skid plate |
The skid plate is properly mounted and secure. All nuts and bolts are present and tight. The skid plate is properly lubed. No gaps between the skid plate and the apron. |
|
Release handle |
The release handle is in the secure position, and locked |
|
Locking pins |
The locking pins are secured and lock |
|
Tires |
TireTread can be no less then 2/32 of an inch. The tread must be evenly worn. Make sure the tire is inflated to 110psi. It can be a re,-caped or re-groved tires. Both of the tires must be the same size tire and type either Radial or Bias-ply tires. The condition of the tire must be the same on both sides the tire is not ABC or dry rot. |
|
Bud rims |
The bud rims is not cracked, bent or broken, and has no illegal welds. |