Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
137 Cards in this Set
- Front
- Back
Spatial resolution of CR is _______________ (less than/more than) film screen radiography
|
Less than
CR is 3-5 lp/mm Film screen 10-15 lp/mm |
|
When were flat panel detectors first used?
|
1995
|
|
What's the photoconductor of flat panel?
|
Selenium
|
|
How does a flat panel detector work?
|
Positive charge is placed on drum; x-rays change charge distribution in selenium to produce an electrostatic image stored on drum; probe scans electrostatic image & creates a voltage that's sent to ADC, then sends digital data to PC
|
|
What are the flat panel detector components?
|
Detector, host computer, image display device, network communications, & image storage device
|
|
What's contained in the detector in a flat panel?
|
Pre-amplifiers, switching control, central logic circuits, ADCs, & internal memory
X-ray detection & digitization of signal both occur in detector (don't need special reader) |
|
What's the purpose of a host computer in a flat panel detector?
|
- acts as an interface between the flat panel detector & the x-ray machine
- plays an important role in controlling x-ray production & signal readout - applies appropriate image processing |
|
Indirect Flat Panel Detector
|
- uses phosphor
- 2 types --> CCD & TFT (main difference = technical component used to convert light to electrical signals) |
|
Charged Coupled Device (CCD) - Indirect
|
- not a true flat-panel digital detector
- uses CCD chip to convert light to electrical signal |
|
What are the components of a CCD?
|
X-ray absorber, light optics, CCD sensor for capturing light, electrical charge readout device
|
|
Thin Film Transistor (TFT) - Indirect - Components
|
X-ray scintillator, amorphous silicon photodiode flat panel layer (a-Si), TFT array for readout, capacitors
|
|
TFT X-ray Scintillator - Cesium Iodide (CsI)
|
- crystals are deposited in a "needle-like" fashion & lay parallel to the x-ray beam
- ex. structured scintillator |
|
TFT X-ray Scintillator - Gadolinium Oxysulfide (Gd2O2S)
|
- crystals deposited as powder particles (turbid phosphor)
- produces lateral light spread which diminishes spatial resolution - ex. unstructured scintillator |
|
What's the purpose of the amorphous silicon photodiode flat panel layer?
|
To convert light from x-ray detection scintillator into electrical charges
|
|
What's the purpose of a capacitor in a TFT?
|
To collect & store electrical charge produced by the a-Si photodiode array
|
|
Direct Flat Panel Detector
|
- uses a photoconductor (usually amorphous selenium [a-Se])
- a-Se displays superb x-ray detection & high spatial resolution properties |
|
What are the components of a digital flat panel detector?
|
Source of high voltage, top electrode, dielectric layer, collection electrode, TFT, storage capacitor, glass substrate
|
|
Design characteristics of Direct Flat Panel Detectors
|
1) Designed as a matrix of detector elements, each which can be regarded as a pixel ("large area integrated unit")
2) There are other electrical components that are included in the flat-panel detector gateline or dataline |
|
Active Matrix Array
|
- consists of rows & columns that play a role in addressing the readout of the signal from each pixel in the direct flat panel detector
|
|
What does each pixel in a direct flat panel detector consist of?
|
TFT (switch), storage capacitor, sensing area
|
|
What does the sensing area of a flat panel detector sense?
|
Indirect --> CsI scintillator light
Direct --> X-ray photons passing through the patient |
|
Gateline / Dataline
|
- switching electronics to activate each row of pixels
- electronic amplifiers for signal readout from each column - signal sent to ADC for digitization |
|
What are some normal sizes of direct flat panel detectors?
|
17" x 17" (43x43cm)
12" x 15" (30x40cm) 7" x 7" (18x18cm) |
|
What are the average sizes of the pixels in a direct flat panel detector?
|
139 µm - 200 µm
|
|
What determines spatial resolution in a direct flat panel detector?
|
Pixel size & pixel pitch
|
|
Pixel Pitch
|
Distance from midpoint of 1 pixel to the midpoint of the adjacent pixel
|
|
How can pixel size be calculated?
|
- with given physical dimension size of the detector & known matrix size for that detector
ex. 43x43cm detector has a matrix of 2688x2688 pixels so: 43 cm / 2688 pixels = 0.01599 cm or 160 µm |
|
How can the number of pixels be determined?
|
By multiplying the dimensions of the matrix size
Ex. 2688x2688 = 7,225,344 pixels |
|
Fill Factor of Pixels
|
Ratio of sensing area of the pixel to the area of the pixel itself
FF = Sensing Area of Pixel / Total Area of Pixel |
|
What 3 components does a pixel contain?
|
1) TFT
2) Capacitor (storage area) 3) Sensing area |
|
What does the fill factor of pixels affect?
|
Both spatial resolution (detail) & contrast resolution (signal to noise ratio)
Proportional relationship |
|
What does PACS stand for?
|
Picture Archiving Communication Systems
|
|
What are the definition points of a PACS?
|
Network of computers, electronically stores & displays images, provides archives for storage, integrates info w/ patient database info, allow for viewing of images in remote locations
|
|
Who introduced the term "digital radiology" in 1970?
|
Dr. Paul Capp
|
|
When did PACS go "mainstream"?
|
Early 2000s
|
|
Home Grown PACS
|
PACS developed by radiology department & hospital using technical components from various manufacturers
|
|
Two-Team Effort PACS
|
Based on collaboration of individuals from both outside & inside the hospital who address PACS specifications
|
|
Turn-Key PACS
|
PACS developed completely by manufacturer who sells it as a single unit to a hospital
|
|
Partnership PACS
|
Manufacturer & hospital work together to ensure the optimum performance & integrity of system via training from personnel, upgrading, & general system maitenance
|
|
Application Service Provider (ASP) PACS
|
A system integrator provides all PACS related services to a client, no IT requirements needed by client
|
|
What were early PACS based off of?
|
UNIX Operating Systems
- not intuitive, lack of integration w/ HIS & RIS |
|
Image Acquisition Modalities
|
- must be digital in nature
- ex. CR, DR, CT, MRI, digital mammo, etc - 2 types: inherently digital & frame grabbing |
|
Inherently Digital
|
- image data is obtained from scanners at the full spatial resolution & bit depth
- ex. CT & MRI |
|
Frame Grabbing
|
- digitize analog signals obtained from the IR, images are sent to image display device
- ex. digital fluoro |
|
LAN
|
- local area network
- ex. computers connected by a short distance |
|
Topologies - Bus
|
Computers (nodes) are connected via single cable
|
|
Topologies - Star
|
All computers are connected to a central host computer, called a "hub"
|
|
Topologies - Ring
|
Computer is connected to 2 adjacent computers, all connections collectively form a ring
|
|
WAN
|
- Wide Area Network
- ex. computers connected by large distances |
|
Bandwidth
|
Data transfer rate of info on a WAN
|
|
Network Protocol
|
Language used to send info on WAN (Control Protocol/ Internet Protocol)
|
|
Intranet
|
Isolated network (ex. one used by a hospital)
|
|
Internet
|
Network of networks, all interconnected
|
|
Teleradiology
|
- concept of using wired or wireless internet to send images to distant site to be interpreted, that info is then shipped back
- some hospitals use this during third shift so no radiologist has to be on call - network security is very important |
|
PACS Main Computer
|
- high performance PC
- PACS controller, database server, image server - images & patient data are sent from acquisition gateway computer via HIS to PACS controller - lots of internal memory |
|
Types of Image Storage Devices
|
Solid state memory magnetic data carriers (expensive, limited storage capacity); optical disks & magnetic tape storage (cheap, large storage capacity)
|
|
RAID
|
Redundant Array of Independent Disks
- may contain several magnetic or optical disks, operates as single large storage device - used for short term storage |
|
DLT
|
Digital Linear Tape
- usually 0.5" long - intended for long term storage |
|
Location of Storage Devices - Offline
|
- must be retrieved by an individual & loaded into a drive for access
- most economical, provides largest storage capacity |
|
Location of Storage Devices - Nearline
|
- removable (RAID)
- longer image retrieval time |
|
Location of Storage Devices - Online
|
- cannot be removed
- provides image access to images within seconds - ex. RAM |
|
What's the purpose of image compression?
|
Speed up the transmission of info & to reduce storage requirements
|
|
Lossless Compression
|
REVERSIBLE
No info is lost |
|
Lossy Compression
|
IRREVERSIBLE
Some info is lost in compression process |
|
JPEG
|
Joint Photographic Expert Group
- image compression that features both kinds - present compression method for DICOM medical images |
|
What does JPEG 2000 use?
|
Wavelets to decrease the compressed image size while enhancing image quality
|
|
What does the compression ratio influence?
|
Size of the compressed image
|
|
Small compression ratios are used with ____________ (lossless/lossy)
|
Lossless (2:1 or 3:1)
|
|
Large compression ratios are used with _____________ (lossless/lossy)
|
Lossy (10:1 or 50:1)
|
|
What's the current standard for the utilization of lossless or lossy?
|
- there's isn't one
- almost all radiologists concerned about litigation potential of an incorrect diagnosis based on irreversibly compressed images |
|
Types of PACS Displays - High Resolution
|
- 2.5k x 2.5k
- used by radiologists for primary diagnoses - most expensive type |
|
Types of PACS Displays - Medium Resolution
|
- 1.5k x 1.0k
- used for secondary diagnoses - review function often performed by radiologists |
|
Types of PACS Displays - Desktop
|
- for techs & physicians other than radiologists
|
|
Types of PACS Displays - Hardcopy
|
- used for image printing
- may eventually become obsolete |
|
What kind of printer is still commonplace among PACS?
|
Dry printers
|
|
RIS/PACS Broker
|
- acts as intermediary device to help the 2 systems communicate w/ each other
- helps ensure all the chart info is with the right image info |
|
DICOM
|
Digital Imaging & Communication in Medicine
- addresses communication of images |
|
HL-7
|
Health Level 7
- address communication of textual info such as patient info, radiology reports, etc. |
|
Classification System - By Size: Single Digital Modality
|
- termed a "mini-PACS"
- a single LAN is a central feature |
|
Classification System - By Size: All Modalities
|
- link to HIS/RIS using either extended LAN or a WAN
|
|
What's the major role of IHE (Integrating the Healthcare Enterprise)?
|
Facilitate communications between various computer based HIS & PACS vendors through the integrated use of DICOM & HL7
|
|
Components of IHE - Data Model
|
Should communicate using DICOM & HL-7
|
|
Components of IHE - Actors
|
- items that use those data models
- ex. patient registration, image manager, master patient index |
|
Components of IHE - Integration Profiles
|
- function: outline roles of actors in DICOM/HL-7 environment
- ex. scheduled workflow profile ensures effective communication from RIS to imaging modality |
|
The RT as Informaticist
|
- rapid evolution & growth of info systems & technology in healthcare has large impact on future of RT
|
|
Definition of Info Technology
|
“The acquisition, processing, storage, and transmission of vocal, pictorial, textual, and numeric information by microelectronics, computers, and telecommunications” – Library of Congress
|
|
PARCA
|
PACS Administrators Registry & Certification Association
- aimed at developing set of skills for PACS administrators |
|
RCSA
|
Radiation Control & Safety Act of 1968
|
|
CPRHSA
|
Consumer-Patient Radiation Health & Safety Act of 1981
|
|
SMDA
|
Safe Medical Devices Act of 1990
|
|
MQSA
|
Mammography Quality Standards Act of 1992
|
|
Which 2 pieces of legislature have the most impact on radiologic tech's today?
|
SMDA & MQSA
|
|
What is quality assurance?
|
Activities that provide adequate confidence that a radiology service will render consistently high-quality images & services
|
|
What are some evaluating activities quality assurance consists of?
|
Intepretation of exams, maintenance of equipment, performance of procedures, filing systems, staff development, scheduling, supply lines
|
|
How does quality assurance work?
|
By identifying problems, monitoring problems, & addressing/fixing it
|
|
What's quality control?
|
Monitors technical equipment to maintain quality standards
Important for this to be seen as a method for controlling radiographic images from start to finish |
|
How do you successfully order & purchase equipment?
|
Identify imaging requirements; develop equipment specifications; bids for equipment compared to budget; installation & acceptance testing for equipment
|
|
Who's responsibility is it to do continuing education on the machines?
|
The Vendor
- more complex equipment should be demonstrated & explained by vendor to at least 2 people as part of purchase contract |
|
Processor Sensitometry measures what?
|
Speed & contrast of film
Should be performed regularly |
|
Film Processing Systems - Monitoring Equipment Performance
|
- encompasses the digital environment, electronics maintenance, algorithm checking
- processor monitoring - dark room fog test (safelight test) - processor sensitometry |
|
Processor Monitoring - Whose responsibility?
|
Radiography Tech/Radiographer
- anyone can perform tests - only qualified radiographers or maintenance should make corrective changes |
|
External Beam Evaluation
|
- someone w/ physical knowledge of equipment should perform this exam
- tools: wire mesh, collimator accuracy, pinhole focal spot camera, digital dosimeter, spinning top & pentrometer |
|
Where should a log of external beam evaluation be kept?
|
In each room to record test results, maintenance logs for each machine, etc.
|
|
Semi-Annual Exams - Focal Spot Size Estimation
|
- needs to be kept within limits to maintain image detail
- Types: line pair resolution tool, star test pattern, pinhole camera |
|
Line Pair Resolution Tool & Star Test Pattern
|
Works by imaging a resolution pattern on film
|
|
Pinhole Camera
|
Permits measurement of focal spot by creating an image of the effective focal spot size on film
|
|
Semi-Annual Exams - Half Value Layer
|
- radiation protection is validated by eliminating the low energy photons
- measured w/ dosimetry equipment to detect quality of aluminum filtration which reduces beam intensity to half the original value |
|
Semi-Annual Exams - Collimator Test Tool
|
- lead marker for each corner of light beam, plus crosshairs or lead marker placed several cm above cassette surface
- 2% SID error is allowed - centering should be +/- 1% of light field CR |
|
Semi-Annual Exams - Positive Beam Limitation (PBL)
|
- mechanism shouldn't permit the primary beam to be larger than the cassette in the bucky tray
|
|
Semi-Annual Exams -Distance & Centering Indicator Accuracy
|
- inverse square law is used
- distance indicators should be measured w/ tape measurer; should be +/- 10% - centering indicators should be +/- 2% |
|
Semi-Annual Exams - Angulator/Protractor Accuracy
|
- can be evaluated w/ large protractor for angle measurements, & a level to verify locks, stops, detents, etc
- angles should be +/- 1% |
|
Semi-Annual Exams - kV Accuracy
|
- kV drifts over time as a result of tube aging
- computerized dosimeters provide digital readouts of average & single-pulse kVp (if settings drift +/- 5% generator must be recalibrated) |
|
Semi-Annual Exams - Timer Accuracy
|
- computerized dosimeters may be used or a spinning top may be used to measure single-phase generators
- a motorized synchronous top may be used for 3-phase units - should be +/- 5% |
|
Semi-Annual Exams - mR/mAs & mA Linearity
|
- cannot be measured w/ noninvasive methods
- inferred by comparing mR/mAs measurements after both time & kVp accuracy are verified - should be +/- 10% |
|
Semi-Annual Exams - Exposure Reproducibility
|
Must be reproducible +/- 5%
|
|
Semi-Annual Exams - Display Monitors
|
- spatial resolution is evaluated through display of a standardized image, SMPTE test pattern, & grayscale tool
- all 3 display axes must be evaluated |
|
How are the X & Y Axes measured?
|
Measures matrix & pixel size accuracy
Imaging spatial resolution test tools to evaluate point spread function, line spread function, & modulation transfer function |
|
How is the Z axis measured?
|
Measure gray scale bit depth
Imaging gray scale performance memory of monitor itself |
|
What's the function of digital detectors?
|
Like screen-film receptors, digital detectors are designed to capture the beam exiting the patient
|
|
Cassette-Based Digital Detector
|
- look similar to s/f receptors
- contains PSP, TFT, or a PSP w/ CCD |
|
Cassette-Less Digital Detector
|
- incorporated as part of imaging equipment
- flat panel detector/TFT - CCD - PSP plate w/ CCD |
|
Detector Element (DEL)
|
Term for each individual square in a TFT array
|
|
What's the purpose of the image gently campaign?
|
Education, awareness, & advocacy
|
|
What's the purpose of the image gently campaign in peds?
|
Improve radiation protection for children nationally & internationally
|
|
Alliance for Radiation Safety in Pediatric Imaging
|
- more than 70 healthcare orgs have joined
- represents more than 800k health care professional worldwide - Goal = change current practice to improve care provided to children |
|
Are anatomically programmed radiography machines always appropriate for children?
|
No because the size of a normal anatomical part is different in children who are still growing
|
|
Dynamic Range of Detector Response
|
Range of exposures to which the detector can respond
|
|
Digital Response Regions
|
- represented by "E" w/ subscripts of "-", "o", or "+"
"-" = underexposure "o" = optimal exposure "+" = overexposure |
|
The dynamic range of a detector ___________ (should/should not) be equated w/ a wide rage of exposures for obtaining an image
|
Should not
|
|
Exposure Indicator - Fuji
|
S-number or sensitivity
|
|
Exposure Indicator - Kodak
|
Exposure Index
|
|
Exposure Indicator - Agfa
|
IgM
|
|
Who published an exposure terminology standard in 2008? (Hint: IEC)
|
International Electrotechnical Commission
|
|
What 3 terms does the IEC standard use that are important?
|
1) Exposure Index (indicates the detector exposure)
2) Target Exposure Index (IR has to be properly exposed) 3) Deviation Index (provides immediate feedback of exposure; measures how far EI deviates from normal) |
|
What is DI (Deviation Index) useful for?
|
Helps lower dose by optimizing radiographic studies
|
|
Exposure Creep
|
Gradual increase over time of RT's selected exposures; leads to excessive dose for peds
|
|
What does BASICS stand for in regard to image analysis?
|
Beam / Artifacts / Shielding / Indicators & Immobilization / Collimator / Structures
|