Related Essays

  • The Importance Of Optical Linear Encoder

    Determining the location of our fixture in space may seem like a simple task but if our goal is precision then we need to know exactly where our platform and...

  • Nt1310 Unit 5 Lab Report

    The time base was set to 40 ms and the rising edge trigger was connected to CH1. The trigger level was set to 1V and CH1 was connected to the input. CH0 was ...

  • De2-115 Peripherals Lab Report

    This would allow a larger hexadecimal number to be displayed. As stated in part 2 results the numbers and letters of the hexadecimal system could be display...

  • Disney's Managerial Grid Analysis

    (58). A visual depiction of the grid is shown as Figure 1. The grid is gauged on a

  • Pt2520 Lab 2.3

    2.2 The method At the searcher will do the searching process as follows: I. Start at the origin and search the cell number 1 and then number 2, 3. Now,...

  • Pm3110 Unit 6 Lab Report

    The four bit number that we used for the first lab was “0100”. We have implemented the sequence detector from the experiment #1. Finally, we have made it wo...

  • Essay On Bipolar Stepper Motor

    The code loads fcontrol.seq, from Ken Merk's article, to find the port and define the words to control the bits on the port. Several other files from the For...

  • Nt1310 Unit 2

    The code can appear in several forms, however in this lab the modular approach was used. This form allows the program to be created in sections, and then t...

  • Level Two Talkaround Case Study

    The fourth level is the Gateway or Console Patch which is a broad term for devices that are able to connect several frequencies bands or coverage region and ...

  • Stepper Motors Case Study

    Initial State e = End State X = Input. Here it is map size,start point,nish point.

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/6

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

6 Cards in this Set

  • Front
  • Back

G00

Rapid Positioning

G01

Linear Positioning [at a feedrate (F)]

G01.1

Threading with a C-Axis positioning

G02

Circular interpolation (CW)

G02.1

Spiral interpolation (CW)

G03

Counter clockwise Circular interpolation