Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
26 Cards in this Set
- Front
- Back
|
How many devices can a Bluetooth device connect to simultaneously? |
7 |
|
|
A device has an IPv6 address of 2001:0DB8:75a3:0214:0607:1234:aa10:ba01 /64. What is the host identifier of the device? |
0607:1234:aa10:ba01 |
|
|
Which layer of the OSI model is responsible for logical addressing and routing? |
network |
|
|
When would a printer be considered a network host? |
when it is connected to a switch |
|
|
Which device provides wireless connectivity to users as its primary function? |
access point |
|
|
Which technology is most often used to connect devices to a PAN? |
Bluetooth |
|
|
Which three factors are reasons for a company to choose a client/server model for a network instead of peer-to-peer? (Choose three.) |
The company network requires secure access to confidential information. The users need a central database to store inventory and sales information. The data gathered by the employees is critical and should be backed up on a regular basis. |
|
|
What is a characteristic of a WAN? |
It connects multiple networks that are geographically separated. |
|
|
Which three layers of the OSI model map to the application layer of the TCP/IP model? (Choose three.) |
application presentation session |
|
|
What is the correct order of the layers of the TCP/IP model from the top layer to the bottom? |
application, transport, internet, network access |
|
|
What TCP/IP model layer is responsible for MAC addressing? |
network access |
|
|
What PDU is associated with the network layer of the OSI model? |
packet |
|
|
Which two layers of the OSI model correspond to the functions of the TCP/IP model network access layer? (Choose two.) |
physical data link |
|
|
What is identified by the 100 in the 100BASE-TX standard? |
the maximum bandwidth in Mb/s |
|
|
Which two characteristics describe Ethernet technology? (Choose two.) |
It is supported by IEEE 802.3 standards. It uses the CSMA/CD access control method. |
|
|
Which IEEE standard operates at wireless frequencies in both the 5 GHz and 2.4 GHz ranges? |
802.11n |
|
|
A customer is considering a multipurpose device to create a home network. Which three devices are usually integrated into a multipurpose network device? (Choose three.) |
switch router wireless access point |
|
|
Which network device makes forwarding decisions based on the destination MAC address that is contained in the frame? |
switch |
|
|
A ______ uses IP addresses to forward traffic from one network to other networks. |
Router |
|
|
A network specialist has been hired to install a network in a company that assembles airplane engines. Because of the nature of the business, the area is highly affected by electromagnetic interference. Which type of network media should be recommended so that the data communication will not be affected by EMI? |
fiber optic |
|
|
Which term describes a type of coaxial cable? |
RG-6 |
|
|
Which pairs of wires change termination order between the 568A and 568B standards? |
green and orange |
|
|
Which two types of signal interference are reduced more by STP than by UTP? (Choose two.) |
RFI and EMI |
|
|
How many host addresses are available on a network with a subnet mask of 255.255.0.0? |
65,534 |
|
|
A technician is troubleshooting a problem where the user claims access to the Internet is not working, but there was access to the Internet the day before. Upon investigation, the technician determines that the user cannot access the network printer in the office either. The network printer is on the same network as the computer. The computer has 169.254.100.88 assigned as an IP address. What is the most likely problem? |
The computer cannot communicate with a DHCP server. |
|
|
What is a characteristic of the UDP protocol? |
low overhead |
