Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
17 Cards in this Set
- Front
- Back
Hidden lines |
Are used to show edges and surfaces that are not visible in a view |
|
Centre lines |
Used to show whole centres and center positions of rounded features such as arcs and Radii |
|
Dimension lines |
Show the direction length and limits of the dimensions of a part. Dimension lines are drawn with an arrowhead at both ends. Extension lines are drawn close to the edges or surfaces they limit. |
|
Object Lines |
Show the visible edges, corners and surfaces of a part. |
|
Conventional Dimensioning |
. |
|
Baseline Dimensioning |
. |
|
Running Dimensioning |
. |
|
Notation Dimensioning |
. |
|
Leader Lines |
Show information such as dimensional notes, material specifications and proccess notes |
|
Phantom Lines |
Are used to show alternate positions for moving parts and the positions of related or adjacent parts |
|
Cutting Plane Lines |
Shows the location and path of imaginary cuts made through parts to show internal details |
|
Section Lines |
Indicate the surfaces in a sectional view as they'd appear if the part were actually cut with the cutting plane line |
|
Break lines |
Are drawn to show that a part has been shortened to reduced its size on the drawing |
|
1inch converted to mm is? |
25.400 mm |
|
1mm is what in Inches |
0.04inches |
|
mm to inches conversion is mm x 0.039370 = |
. |
|
Inches to mm conversion is Inches ÷ 0.039370 |
. |