Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
44 Cards in this Set
- Front
- Back
Which ANEW card does RDSS inputs go through on the CP-2044?
|
ANEW 5
|
|
How many MES/AC cards are in the CP-2044?
|
3 MES/AC cards in the CP/2044 for Keysets and Drivers
|
|
What are the two types of buses in the CP-2044?
|
The VME is the internal bus. and the VSB is the external communications bus
|
|
How many SDC's are in the CP-2044 and what does it stand for?
|
3 SDC's and it stands for Synchro Digital Converter
|
|
How many Secondary Storage (bubble) Memory Array cards does the CP-2044 have and what are they connected to?
|
6 Secondary Memory Arrays and they connect to Secondary Memory Controller (SDC) and the Secondary Memory Sequencer (SMS)
|
|
Which MES/AC cards communicate with the TACCO keyboard 1-6?
|
MES/AC 2
|
|
Which card accesses the ARM system and ORD system for the CP-2044?
|
The ARM/ORD card via the VSB bus to the GPC
|
|
How many GPC's are in the CP-2044 and which one is accessed first?
|
3 GPC cards and the lowest one is accessed first starting with 0, then 1, then 2.
|
|
What is an ARO and where are they located?
|
Auxillary Readout Display (ARO) located at TACCO and NAV/COM stations
|
|
Where are the ARO power supplies located and which is on top and which is on bottom?
|
Located on floorboard of NAV/COM and the TACCO is on top and NAV/COM on bottom
|
|
SS3 gets RADAR video on the SDD via what circuit cards with the CP-2044?
|
It gets RADAR via its own AGP, GMD, and MDA
|
|
How many Global (CMOS) Memory Arrays are in the CP-2044?
|
4 Global Memeory Arrays
|
|
What must be done on the CP-2044 MPC after switching bootstrap modes?
|
Stop / Master Clear shall be pressed after each mode change
|
|
What are the 4 modes on the bootstrap switches on th CP/2044?
|
A-Preflight Loader
B-STP C-TSM D-Idle or (Perge and Reformat) |
|
How much Local Memory does the GPC have?
|
GPC has 1 megabite of Local Memory
|
|
What does EPROM stand for?
|
Electronically Erasable Programmable Readonly Memory
|
|
The CP-2044 gets what voltage for operating power from what piece of equipment?
|
Computer recieves 115Vac from the (CTC) Computer Terminal Control
|
|
In what order is Purge and Reformat completed?
|
Bootstrap to A (set)
Purge (pressed multiple times) Function select (pressed) #2 Enter #1 Enter Device select (pressed) #9 Enter #5 Enter |
|
What does RDSS stand for?
|
Replacement Data Storage System
|
|
What does ADSS stand for?
|
Additional Data Storage System
|
|
What voltage does the internal cooling fan receive on the RDSS?
|
The cooling fans receive -12 Vdc
|
|
Overtemp on the RDSS lights what color at what temp.?
|
The LED comes on RED at 68*C and stays on until temp drops below 63*C
|
|
TACCO Power Control Panel supplies what to the Power Distrobution Box?
|
The TACCO Control Panel Supplies and Mechanical Ground to the TACCO Control Panel
|
|
The CP-2044 is Powered on by which switch on the TACCO Power Control Panel?
|
Logic 2 powers on the CP/2044
|
|
Where are the CB locations for the MPD and SDD diplays on an Update III aircraft?
|
DPS-MULTIPURPOSE DISPLAY-
TACCO SS3 |
|
MDD/SDD consist of how many offline analog channels and what do they do?
|
4 Channels..
Channel 1) Raw Radar @ SS3 from APS 137 Channel 2) Spare Channel 3) Raw Radar @ SS3 from CP-2044 Channel 4) Raw Radar @ SS3 from CP-90 |
|
MPD/SDD is what type of display?
|
16" Charactron type display w/ a plastic implosion shield
|
|
The CTC has what three Voltages?
|
115Vac- for ASQ
26 Vdc- for Analog parts (TAS, BARO,ALT) 12Vdc- Ord alert light (logic via the Power Distro Box |
|
What two test can be performed on the ARO and where?
|
Test 1) 20X20 charc. test (400)
Test 2( 8X8 Charc. test (64) |
|
What are the 5 differences between the CP-2044 and the CP-2339?
|
1. No Secondary Memory
2. Ethernet 3. 1553 Bus 4. VDC 5. ANEW #5 (spare) |
|
The CP-2339 central computer uses multiple proccessors and a ____ architecture to provide data processing and performance and other capabilities.
|
Dual-bus Architecture
|
|
ASQ-222 Digital computer Equipment Suite (DP/DCS) consist of what equipment?
|
CHRDs, PCHRDs, PEPs, DEPs, ANK,s TB,s and the VDC
|
|
How does the RDSS interface with the CP-2339?
|
The RDSS interfaces with the CP-2339 via the MAUto the EGPC on the Ethernet
|
|
How does the VDC interface with the CP-2339?
|
The VDC interfaces with cp-2339 via the SCSI to the VME bus.
|
|
THe MIL-STD-1553 interfaces with what external systems?
|
The 1553 bus A/B interface with OASIS, SAR, MINI DAMA, and MATT.
|
|
There are ___ GPCs, ___SDCs, ___ secondary memory.
|
The CP-2339 has 3 GPCs, 3 SDC,s and no secondary memory.
|
|
What are the 3 modes of opderations for the VDC?
|
Online- interfaces w/ CP-2339
Local - Provides Radar, AIMS, VTR, and OASIS to Pilot, NAV/COM, TACCO, and SS3 Fail-safe - APS-137 to PILOT/SS3, OASIS to NAV/COM, SEI to TACCO |
|
Where are the DEPs loacated and how many are there?
|
There are 2 DEPs and the are located at the PILOT Station and Ordinance Station.
|
|
Three TB buttons have what functions?
|
Lower left - Activates show / request sellection
Center - Non functional Lower right - Show/request selection |
|
WHat are the 2 modes of the CHRD?
|
Local mode - VDC controlled. full or quad display
On-line - CP-2339 controlled. full screen right hand or full screen left hand |
|
What pbs activates Battle Overide mode?
|
Brightness - and Contrast + powers on the display after over-temp sensor activates and shuts down the display.
|
|
What type of printer is the HCR?
|
It is a High Speed Thermal Printer.
|
|
What is the NOTE associated with the HCR Printer.
|
The VME VDC and datmetrics printer (HCR) are not fully compatible, and may experiance interface errors between the VDC and printer with this configuration.
|
|
ON the HCR a red indicator either illuminating fully or blinking means what?
|
Continuous - Out of paper or door open
Blink Once- Logic CCA fault Blink twice - Power Supply Fault Bilnk three - Motor Fault Blink Four - Print head over/under temp |