Related Essays

  • Nt1210 Chapter 7 Summary

    (3) When traffic becomes heavy on a circuit-switching network, some calls are jammed; that is, the network refuses to accept additional connection requests u...

  • Nt1310 Unit 3 Assignment 1

    Due to the age of the existing equipment, four new Cisco Catalyst 3560 V2 24 port switches will be use and configure for network redundancy by connecting eac...

  • Nt1310 Unit 3 Types Of Remote Access

    Dynamic solicitations incorporate CoA asks for, which determine VSA adjustments and administration changes, and detach demands, which end endorser sessions. ...

  • Ppb Research Paper

    The updated course incorporates policy and highlights CPPA initiatives that have occurred over the past year. The following is a consolidated listing...

  • DNP3 Protocol 3.3

    This allows the manufacturers to install systems with reduced functionality that could still provide defined levels of functionality(Clarke et al., 2004). ...

  • Nt1310 Unit 7 Lab 1

    C = Represents the Circuit C = {C0, C1, …Cn | C} Where C0 – Cn Circuit of different locations. R = Represents the Response signal R = {R0 | R} Where R0 ...

  • Level Warrant Officer Duties

    SFWOAC Class 002-17 briefed the rest of class on FM 7-0, ADRP 7-0, and USASFC 350-1. These

  • Nt1310 Unit 1 Exercise 1

    In Reno, when the sender receives a non-duplicate ACK it sets congestion window(cwnd) to slow-start threshold(ssthresh), terminates fast-recovery, and resume...

  • Pm3110 Unit 4 Test Paper

    VCC: The data transmission of a virtual way is coherently isolated into particular virtual channels utilizing a virtual divert identifier in the ATM header....

  • Cssna Aircraft Case Study

    Shared Process box Inverntory WIP Stagnation Dedicated Maintenance Box Electronic Information Flow First In First Out Lane Physical Flow Rework L...

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/17

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

17 Cards in this Set

  • Front
  • Back
What is the default VRRP default Hello Timer?
1 second
What is the VRRP default Holdtime Timer?
3x Hello + skew
What is the VRRP Hello message multicast address?
224.0.0.18
What is the VRRP Hello message protocol number?
IP 112
Is VRRP Cisco-proprietary or an open standard?
Standards based
What is a VRRP backup router?
The secondary VRRP router; it has the second-highest Priority .
(Same as HSRP “standby” router)
What is the VRRP Master Router?
The primary HSRP router that currently forwards packets for the virtual router and has the highest Priority.
(Same as HSRP “active” router)
What is the VRRP virtual MAC address?
0000.5E00.01xx
“xx” = VRRP Group number
What is the VRRP Group number range?
0 - 255
What is the VRRP Priority range and default?
1 to 254 (Default is 100)
How are VRRP routers elected?
Priority value (highest = preferred)
Can VRRP track interfaces?
No
Does VRRP preempt by default?
Yes
What is the default VRRP Hello Timer?
1 second
What is the VRRP default Holddown timer?
Master Down Interval - 3 x Advertisement + Skew
How can you load balance with VRRP?
Create multiple groups on a subnet. One group is active for a portion of the network and standby for the other. The other group is standby for a portion and active for the other.
What is the root VRRP command?
vrrp group