Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
9 Cards in this Set
- Front
- Back
coolant leaking from an intake manifold can evaporate fast enough to leave no trace of a leak. |
true |
|
when changing a timing belt it is recommended that the____ also be replaced. |
front crankshaft seal |
|
some of the wiring under the hood of a late model vehicle is bright orange covering. this indicates a ____. |
high voltage electrical system |
|
on some engines equipped with a timing belt, the belt also may drive the ____. |
water pump |
|
an intake manifold gasket has been replaced due to a vacuum leak. which of the following steps uses a scan tool to complete the job? |
idle relearn |
|
coolant drained from the cooling system when replacing a thermostat or water pump should be ____. |
disposed of property or recycled |
|
a water pump can fail to provide the proper amount of coolant flow through the cooling system if what has happened? |
the impeller blades are worn or slipping on the shaft |
|
intake manifold gaskets on a v-type engine can fail due to what factor? |
fretting, relative movement between the intake manifold and the cylinder head, coolant damage |
|
the torque specification for many plastic intake manifolds are in what unit? |
pound-inches |