• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/16

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

16 Cards in this Set

  • Front
  • Back

First step

I'm going to put my truck in neutral, start my engine and build pressure to no more than 140 psi by raising rpm no more than 1,500

My air tanks...

... are at maximum capacity approximately at 125 psi. I know this because my needle stopped moving to the right.

Now I'm going to place my...

... truck into a low gear, turn off my engine, and release my brakes.

My next step is my...

One-minute air leak. I cannot lose more than 4 psi. *steps on service brake* I am at () psi. My minute starts now... My minute is up and I didn't lose more than 4 psi, my system is working properly.

My next step is my...

... Low warning device. TURN KEY ON. Then I am going to lower my pressure between 75-55 psi. I will hear a buzzer and a light will appear at my dash at approximately () psi. Telling me I have low air pressure, my system is working properly.

TURN...

KEY OFF

My next step is my...

... emergency pop out test. I will lower my air pressure between 45-20 psi but pumping my service brake. My valves popped out automatically approximately at () psi. My system is working properly.

My next step is my...

Governor cut out, START ENGINE, I'm going to build pressure to no more than 140 psi by raising my rpm to no more than 1,500

My governor cut out...

... is approximately 125 psi, I know this because my needle stopped moving to the right

My next step is my...

My governor cut in, I will lower my pressure no less than 100 psi.

My governor cut in...

... is approximately () psi, I know this because my needle started moving to the right. My tanks are l receiving air, my system is working properly.

My next step...

Is testing my 3 brakes. I will place my truck into a low gear.

First I will...

...test my trailer brake *release clutch slowly* my trailer brake is working properly

Now I will...

...test my tractor brake *release clutch slowly* my tractor brake is working properly

Apply...

...service brake slowly. *release clutch slowly* my brakes are working properly

Put...

...truck into neutral. DO NOT TURN TRUCK OFF!