Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
75 Cards in this Set
- Front
- Back
What is Chapter 10 of the NAMP? |
NAMPSOPs |
|
What manual is Aircraft Fuel Cells and Tanks? |
01-1A-35
|
|
What manual is the Aircraft Refueling NATOPS Manual? (Fuel Sample Instructions) |
NAVAIR 00-80T-109, |
|
What are Fuel Sampling Procedures? |
-24hrs before flight, valid for 24 hours -If one pint sample bad, drain one gallon, still bad, notify Maint. (at squadron) -If one pint sample bad, drain 5 gallon, retest, drain up to 10 gallon, if still bad notify Production control |
|
What is the Joint Oil Analysis Program Manual?
|
NAVAIR 17-15-50.1 to ...3
|
|
What form is used for Oil Analysis Requests?
|
DD 2026
|
|
What form is the Aircraft Inspection and Acceptance Record (A-Sheet)?
|
CNAF 4790/141
|
|
What manual is the Aviation Hydraulics Manual and what are hydraulic sample limits?
|
NAVAIR 01-1A-17
Class 5 for aircraft and Navy Standard Class 3 for SE |
|
What instruction is the Naval Aviation Safety Program?
|
OPNAVINST 3750.6
|
|
What are the Tool Control Manuals (series)?
|
NAVAIR 17-1
|
|
What instruction is the NATOPS General Flight and Operating Instructions?
|
OPNAVINST 3710.7,
|
|
What manual number is the CV NATOPS Manual?
|
NAVAIR 00-80T-105
|
|
What manual number is the LHA/LHD/MCS NATOPS Manual?
|
NAVAIR 00-80T-106
|
|
What form is the Plane Captain Designation?
|
CNAF 4790/158
|
|
Who is the plane captain program monitor and who designates this? |
Line/Power Line Division Officer (Designated by MO)
|
|
Who can sign plane captain designations? |
CO or if designated, the MO |
|
What is the Aircraft Signals NATOPS Manual number?
|
NAVAIR 00-80T-113
|
|
How often for Plane Captain requal? |
Semi-annual |
|
What number is the Basic Handling & Safety Manual, US Navy Support Equipment Common?
|
NAVAIR 00-80T-96
|
|
Who is the SE Operator Training and Licensing Program Manager at "O" and "I" Level?
|
AMO (O-level)/SE Division Officer/QA Specialist (I-level/FRC) |
|
What form is the Support Equipment Operator's License?
|
CNAF 4790/102
|
|
Who signs S.E. licence? |
MO |
|
How long is an S.E. licence is good for? |
3 years |
|
What manual number is the Support Equipment Cleaning, Prevention and Corrosion Control?
|
NAVAIR 17-1-125
|
|
Who is the SE PMS Program Manager?
|
MMCO/Production Control Officer
|
|
What is the Naval Aviation Metrology and Calibration Program manual?
|
NAVAIRINST 13640.1
|
|
What does SCIR stand for?
|
Subsystem Capability and Impact Reporting
|
|
What is in the NAMP Chapter 13? |
Naval Aviation Logistics Command Management Information System (NALCOMIS) and Naval Tactical Command Support System (NTCSS) Optimized Organizational Maintenance Activity (OMA) SPAWAR Systems Center Atlantic (SSCA)
|
|
What is in the NAMP Chapter 15? |
Organizational Level (O-Level) Maintenance Data System (MDS) Functions, Responsibilities and Source Document Procedures
|
|
What is the Green MAF form? |
OPNAV 4790/60
|
|
What is in the NAMP CHAPTER 17? |
Aircraft Material Condition Readiness
|
|
What is in the NAMP Chapter 2? |
Aircraft Controlling Custodians (ACCs) and Type Wing and Carrier Air Wing (CVW)
|
|
What form is the SE Custody and Maintenance History Record?
|
CNAF 4790/51
|
|
What is in the NAMP Chapter 5? |
Maintenance Control, Production Control, and Material Control; Aircraft Logbook(Paper), Reports, and Configuration Management (CM) Auto Log-sets (ALSs); andAircraft Inventory and Readiness Reporting System (AIRRS)
|
|
What is the Supply Requisition Form? |
DD 1348
|
|
What is the Equipment History Record (EHR) Card?
|
CNAF 4790/113
|
|
What is the Scheduled Removal Component Card (SRC)?
|
CNAF 4790/28A
|
|
What is in the NAMP Chapter 7? |
QA |
|
What is in the NAMP Chapter 9? |
Material Managment |
|
What is the corroding metal is called? |
Anode |
|
What is uniform surface corrosion?
|
- Most Common - Uniformly over the entireexposed surface |
|
What is Galvanic corrosion? |
- Different metals are in contact with eachother - Corrosiondeposits at the joint between the metals |
|
What is Pitting corrosion? |
- Localized attack - White orgray powdery deposit, similar to dust - Leaves pits |
|
What is Intergranular corrosion? |
- Attack on the grainboundaries of the metal |
|
What is Exfoliation corrosion? |
- Advanced form ofintergranular corrosion - Surface grains of ametal are lifted up |
|
What is Crevice corrosion? |
- most familiar types of corrosion - Stagnant solution has pooled |
|
What is Filiform corrosion? |
- Occurs on metalsurfaces having a thin (~4 mils) organic protectivecoating - Wormliketrace of corrosion |
|
What is Erosion corrosion? |
- Increase in the rate of attack on a metal due to theaction of a corrosive fluid against the metal surface |
|
What is Stress Corrosion? |
- Cracking of a metal caused by the combined effects ofconstant tensile stress |
|
What is Corrosion fatigue? |
- Cracking of metals caused bythe combined effects of cyclic stress and corrosion |
|
What is Fretting corrosion? |
- Occurs at contact areas between materials under loadsubject to repeated vibration |
|
What is the part number for Compound, Aircraft Cleaning?
|
MIL-PRF-85570
|
|
What is the part number for Compound, Corrosion Preventive (CPC)?
|
MIL-PRF-81309
MIL-C-81309 |
|
What is the part number for Cleaning Compound, Turbine Engine Gas Path?
|
MIL-PRF-85704
|
|
With what do you clean a lead acid battery? |
10% sodiumbicarbonate (ordinary baking soda in water) |
|
With what do you clean a Ni-Cad Battery? |
3% boric acid (in water) solution
|
|
What is the timeline to submit change to evaluation? |
2 years |
|
What is the timeline to submit statement to evaluation? |
2 years |
|
How long are evals retained by the reporting senior and command? |
- Reporting senior keeps FITREPS and CHIEFEVALS for 5 years - Command keeps CHIEFEVALS and EVALS for 2 years |
|
What are the Eval Due Dates? |
- March (E-5) - June (E-4) - September (E-7) - November (E-6) |
|
When can you omit a periodic eval? |
If the member received an Observed Regular report ending no more than 3 months prior to the Periodic report date.
|
|
What is the EVAL Manual? |
BUPERSINST 1610.10C
|
|
How long can a regular report eval cover? |
15 Months |
|
What is an AIDR? |
Acceptance Inspection Deficiency Report
- Identifies/documents defects in newly manufactured, modified, or reworked aircraft, including aircraft that have completed PMI |
|
What is the submission timeline for an AIDR and through what is it submitted? |
Submitted via JDRS within 5 calendar days after completing an acceptance inspection or post D-level FCF |
|
Discrepancies not found during initial AIDR can be submitted when and on what? |
Within 30 days on a supplemental AIDR |
|
What form is the Chart C - Basic Weight and Balance Record? |
DD365-3 |
|
What form is the Chart A - Basic Weight checklist record? |
DD365-1 |
|
What system manages TDSAs (Technical Directive Status Accounting)? |
Deckplate |
|
What Big Navy organization issues TDs? |
COMNAVAIRSYSCOM (with ACC/TYCOM concurrence) |
|
Who bottom lines the MMP? |
MO |
|
What is an XRAY? |
The primary means of recording aircraft status changes, from acceptance into the inventory until final strike.
|
|
When must XRAYS be reported? |
By 2400 the day of an aircraft is destroyed or lost, and by 1600 the next working day for all others. |
|
What online program tracks engine custody? |
Deckplate |
|
When must an Engine Transaction Report (ETR) be submitted? |
NLT 2400 on the day of the transaction. |