Related Essays

  • Examples Of Inelastic Elasticity

    Before we go any further I want to take some time out to share the meaning of some of these terms and give you a few examples. First let 's examine what Elas...

  • The Diaphragm Spring Characteristics

    These are explained as follows- The following interpretation can be made from above graphs for 100N load: 1. The graph 5.7 shows the variation in total de...

  • Advantages Of Non Destructive Testing

    The ductile range- Range at which a material can deform under tensile stress The modulus of elasticity- tendency of an object to deform along an axis when o...

  • Armed Force Research Paper

    Tensile force on R.C.C: - The tensile force is the pulling force on both the end of the R.C.C and both the ends of the R.C.C will undergo tension. Shear f...

  • Characteristics Of Mooring Characteristics

    1.4. LOADING CHARACTERISTICS Often materials are subject to forces (loads) when they are used. The mooring lines have to withstand the loads acting on the ...

  • Taking A Look At Steel Frames

    Imposed loads are included when considering deformation at serviceability of the construction, usually, 30%, while the actual imposed load will be considerab...

  • Wheatstone Bridge Analysis

    The following equation is used to calculate strain using full bridge type 2. a) Full bridge type 3: This arrangement measures only axial strain and has ...

  • ASTM Standards: Consensus Standards For Systems, Services, Materials And Product

    The error in the load should not exceed more than -1% - +1% of the maximum load. Appropriate corrections should be made if the stiffness of the testing mater...

  • Price Elasticity Essay

    INTRODUCTION 1.1 The concept of elasticity Elasticity is an economics concept that measures the responsiveness of one variable to changes in another variable...

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/3

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

3 Cards in this Set

  • Front
  • Back

A measure of the deformation in a member by a load is defined as:
Strain
What is the factor of safety for a steel hanger having an ultimate strength of 70000 Newtons per cm2 and supporting a load of 87500 N. The hanger has a cross sectional area of 5 cm2.
4
The ability of a material to return to its original shape after the force or load which caused the deformation is removed is called:
elasticity