2A571C Cdc Vol 1 Self-Test

Front 1

To the greatest extent possible, how should maintenance be performed?

Back 1

on a preplanned and scheduled basis

Front 2

Using equipment generates what type of maintenance?

Back 2

Corrective

Front 3

What are the two basic types of scheduled and unscheduled maintenance?

Back 3

ON and OFF equipment

Front 4

Maintenance Cross-tells are used for what purpose?

Back 4

Highlight trends, benchmarks, standards, and safety conditions

Front 5

What should typically be included in a cross-tell report?

Back 5

national stock numbers

part numbers

specific location of problem areas

relevant background information

history

Front 6

What are two major goals of Intermediate Repair Enhancement Program (IREP) meetings?

Back 6

increase ability to repair locally

reduce operation cost

Front 7

Which level of maintenance is performed off-equipment at the backshop level?

Back 7

Intermediate

Front 8

In order of increasing capability, what are the three separate levels of maintenance?

Back 8

Organizational, Intermediate, Depot

Front 9

What level of maintenance is used for complex repairs, and is located at a major repair facility?

Back 9

Depot

Front 10

What combined maintenance approach modifies or eliminates the intermediate function, by consolidating with the depot level?

Back 10

2-level maintenance (2LM)

Front 11

What type of maintenance facility is a hybrid of 2LM and 3LM and combines intermediate-level maintenance from multiple bases to one location?

Back 11

Regional Repair Center

Front 12

What type of specialized regional repair facility provides intermediate-level maintenance for selected commodities?

Back 12

Central Repair Facility

Front 13

How can a successful Reliability and Maintainability (R&M) program be defined?

Back 13

the ability to identify and correct problems before they affect combat capability

Front 14

What is the primary scope of the Product Improvement Working Group (PIWG)?

Back 14

address product deficiencies affecting R&M

Front 15

Who takes lead in identifying, tracking, assessing, and correcting R&M deficiencies on their assigned air and space equipment and also co-chairs the Product Improvement Working Group?

Back 15

single manager

Front 16

As an end user, what is your primary focus in the Deficiency Report (DR) process?

Back 16

Identify discrepancies

properly submit reports

Front 17

What MXG agency is tasked with providing technical assistance for DRs?

Back 17

QA

Front 18

When the scope of an Operating Instruction (OI) will cross organization grop lines, at what level should it be published?

Back 18

Wing instruction level

Front 19

What office assumes sole responsibility for the accuracy, currency, and integrity of the contents of an OI, and for compliance with it?

Back 19

Office of Primary Responsibility (OPR)

Front 20

Can an AF civil service employee act as the POC for an OI?

Back 20

yes

Front 21

Which section acts as the OPR for maintenance policy guidance in the MXG?

Back 21

QA

Front 22

What type of support agreement governs services provided by US Northern Command to US Central Command?

Back 22

Intra Service

Front 23

What flight within the MXG normally acts as the POC for Support Agreements (SAs)?

Back 23

Programs and Resources flight

Front 24

What is the most important thing YOU must know about SAs?

Back 24

What is in the ones pertinent to you

Front 25

What is historical Documentation as it pertains to aircraft and equipment?

Back 25

Permanent record of significant maintenance actions

Front 26

Who is responsible for determining which items in the MDS specific -6 TO need historical reporting, and for informing the single mangers so the items can be identified for reporting?

Back 26

Item managers

Front 27

For aircraft engines, when are the printed copies of the AFTO IMT 95 NOT required to accompany end-items upon transfer to/from another location?

Back 27

when the location has access to MIS (maintenance info system)

Front 28

During what type of transfer do helicopter blades and tail rotor blades have to be accompanied by a printed copy of their AFTO IMT 95?

Back 28

disposal

Front 29

Upon transfer of engines to a depot facility, who is responsible for ensuring all basic engine components have been accounted for?

Back 29

maintenance facility that preserves the engine

Front 30

what acft engine documentation is an AFTO IMT 95 primarily used for?

Back 30

accumulated cycles

operating time

maintenance history

manufacturing data for turbine wheels

Front 31

which info system is considered to be the standard AF base-level automated system?

Back 31

IMDS-CDB

Front 32

What are work center and shift supervisors responsible for doing with MIS data integrity?

Back 32

daily review of data input by the people under them

Front 33

what section guides the DIT process, and is responsible for ensuring the MIS data provided to maintenance managers is meaningful and factual?

Back 33

maintenance management analysis (MMA)

Front 34

What section is responsible for correcting incorrect and erroneous data entered into the MIS?

Back 34

the section that inputted them

Front 35

As a roadmap, what can maintenance management metrics help you determine?

Back 35

where the organization has been, is going, and how to get there

Front 36

What are the two major categories for metrics, and what do they represent?

Back 36

-leading Indicators shows a problem first while it is impacting maintenance's ability to provide resources to execute the mission

-lagging indicators shows firmly established trends

Front 37

What are maintenance repair priority levels?

Back 37

1. Acft of alert status or acft supporting war plan or national emergency missions and the AGE, munitions, and MSE needed to support it

2. primary mission acft, AGE, munitions and MSE needed to support it within the first 8 hours after landing or start of recovery, and within 6 work hours of launch, alert or test

3. primary mission acft, engines, missiles and related AGE, munitions, MSE that will prevent or delay mission

4. routine or extensive repair of primary mission acft, AGE and repair cycles assets

5. non-tactical or non-primary mission acft undergoing extensive repair

Front 38

If a change is made to a repair priority level, does the LRS parts delivery priority have to be changed to match it?

Back 38

no

Front 39

What responsibilities does a SQ/CC have with the overall focus of upgrade training and maintenance qualification programs?

Back 39

emphasize quality, and not focus on meeting minimum upgrade time frames

Front 40

Who does the SQ/CC appoint to help ensure deployment readiness?

Back 40

Unit Deployment Manager (UDM)

Front 41

If squadron manning authorizations are not right, what can the SQ/CC do to help remedy the situation?

Back 41

coordinate with wing manpower office through group manning directly to prepare an Authorization Change Request (ACR)

Front 42

What two positions within the MOS perform essentially the same duties as the MOO/MX SUPT?

Back 42

MOF/CC and MOF/SUPT

Front 43

In AMXS/HMXS or MXS, who does the MX Superintendent work for?

Back 43

MOO

Front 44

Who is responsible through the MOS/CC to the MXG/CC for monitoring for overall health of the fleet?

Back 44

MOF CC and MOF SUPT

Front 45

Who is responsible for developing written procedures for EOR inspections in coordination with the Wing Weapons Manger, weapons safety manger, and airfield management?

Back 45

MOO/MX Supt in AMXS/HMXS

Front 46

Who is responsible for reviewing and consolidating monthly maintenance plan inputs from the various MXS flights/sections, and for forwarding them to PS&D?

Back 46

AMU OIC/SUPT

Front 47

In MOS, who are Flight Chiefs responsible to in the area of leadership, supervision, and training of their assigned flight personnel?

Back 47

AMU OIC or SUPT

Front 48

What must a Flight Chief inform workers of, in the way of job environment safety?

Back 48

Any hazardous conditions

Front 49

Who is responsible for reviewing Pilot Reported Discrepancies (PRD) and flight aborts daily, to ensure proper maintenance is being taken to correct underlying problems?

Back 49

AMU OIC/SUPT

Front 50

Who chairs a daily maintenance production meeting to develop or modify the overall maintenance plan of attack for an AMU?

Back 50

AMU OIC/SUPT

Front 51

What is the primary job of the section NCOIC/SC?

Back 51

first line manager supervisor of maintenance production TO authority and supervisor

Front 52

What AF IMT should a section NCOIC use to monitor, track, and document safety and health-related information about his or her workers?

Back 52

55

Front 53

For section managed TMDE, what is a section NCOIC responsible for ensuring?

Back 53

test equipment maintenance and calibration requirements are met

Front 54

The section NCOIC should ensure cross-utilization training requirements do not interfere with what?

Back 54

Upgrade training

Front 55

What is the primary job and grade to be an AMU flight-line Pro Super?

Back 55

Direct overall maintenance effort of their AMU

SNCO or civilian equivalent

Front 56

What is the primary job of an MXS Pro Super?

Back 56

to provide MOC with MXS specialist non-availability

identity production requirements

direct maintenance efforts in AMU

Front 57

Which MOF section is responsible for monitoring and coordinating sortie and maintenance production, and overall execution of the flying and maintenance schedules?

Back 57

MOC

Front 58

Who is responsible for appointing, in writing, a highly qualified individual to manage the Engine Health Management Program?

Back 58

MXG/CC

Front 59

Which MOF section is responsible for coordinating acft maintenance requirements and ensuring proper utilization scheduling b/w the OG and MXG and any other agency?

Back 59

PS&D

Front 60

What is the primary mission of the Maintenance Training Flight, other than training?

Back 60

MXG single point of contact for training matters

manage/control training management subsystem of IMDS-CDB

Front 61

What is the primary mission of MMA?

Back 61

track analyze and present info to access acft health

Front 62

What are unit training managers responsible for, in addition to assisting squadron commanders with training matters?

Back 62

managing squadron enlisted specialty training

Front 63

Is the MTF normally allowed to duplicate training taught on base by a locally assigned AETC TD?

Back 63

no

Front 64

Programs and Resources flight personnel are primarily responsible for managing what programs within the MXG?

Back 64

manning, facilities, SAs, and development programs

Front 65

what is the basic mission of an AMU?

Back 65

launch/recover acft, service, maintenance for daily flying missions

Front 66

What are the standard sections of an AMU?

Back 66

Debrief, acft, specialist, weapons, support

Front 67

What is a definition of sortie generation?

Back 67

cumulative effort required to launch and recover acft

Front 68

In addition to closely monitoring acft status, who must the flight-line expediter notify when status and configuration changes occur?

Back 68

MOC and Pro Sup

Front 69

what are some of the references that flight-line expediters must keep close at hand?

Back 69

Flying schedules

emergency actions

base map with cordon overlay

IPI listing

MESL

QRL

WUC manual

Front 70

What are the items that must be tracked by expediters?

Back 70

ALL THE THINGSserial number

location

priority

status

ETIC

configuration

condition codes

fuel loads

munition loads

Front 71

What are some of the info elements that Debrief personnel enter into the MIS?

Back 71

discrepancies

deviation data

capabilities of the system

utilization

flight data

Front 72

Who is responsible for ensuring acft form sets are available to Debrief by end of flying day, if debriefs have been suspended due to flight surges?

Back 72

Expediter or Pro Sup

Front 73

What are some of the entries that Debrief must ensure the AC (acft commander) makes in the AFTO 781 during debrief?

Back 73

flying times, servicing data, condition codes

Front 74

What does an aft landing status code of 2 mean with regard to acft of systems?

Back 74

minor discrepancy, continue flying

Front 75

what are the three different crew chief positions assigned to the acft section?

Back 75

DCC

ADC

FCC

Front 76

What are DCC and ADCs charged with doing in respect to assigned acft?

Back 76

Managing and supervising all maintenance procedures on that acft

Front 77

The Specialist section is normally responsible for what?

Back 77

acft T/S

on-equipment repairs

reprogramming avionics

classified acft items managment

Front 78

Why is the Specialist section NCOIC responsible for promoting cross-talk with other unit specialist sections?

Back 78

obtain repeat/recur/CND trends

Front 79

Which specialist is responsible for maintaining ECS, Bleed air, Vacuum, pneumatic, fires suppression and O2 systems?

Back 79

ELEN/E&E

Front 80

Who must the specialist expediters coordinate with, to determine maintenance priorities for support?

Back 80

Pro Super and flight-line expediter

Front 81

What are the two standard elements in an AMU weapons section?

Back 81

loading

maintenance

Front 82

who serves as the key advisor to the AMXS MOO on factors that affect weapons training, weapons loading, and armament system maintenance capabilities for the AMU?

Back 82

weapons NCOIC

Front 83

What are weapons expediters responsible for monitoring, with regard to the weapons section NCOIC?

Back 83

armament system maintenance, and loading operations

Front 84

who must the Weapons Expediter coordinate with for delivery and pick-up of munitions?

Back 84

MOC

Front 85

Who is responsible for controlling access to an acft undergoing munitions load?

Back 85

Load Crew Chief

Front 86

The NCOIC of the AMU support section must come from one of what two AFSCs?

Back 86

2Axxx or 2Wxxx

Front 87

What is the minimum amount of time that personnel are normally assigned to Support Section?

Back 87

12 months

Front 88

What info must supply support personnel keep expediters updated on?

Back 88

Back ordered parts status

Front 89

List the nine standard flights that make up the MXS

Back 89

AccessoriesTMDEAGEArmamentAvionicsFABMXMunitionsPropulsion

Front 90

If the MXS has more than 700 manning authorizations, what do commanders have the option of doing?

Back 90

split into 2 squadrons

Front 91

what sections are in a standard accessories flight?

Back 91

E&E, Egress, fuel, hydro

Front 92

Which Accessories flight is responsible for repairing oxygen and nitrogen carts?

Back 92

E&E

Front 93

When egress explosive devices are damaged or suspected to be unsafe, who does Egress request assistance from?

Back 93

EOD

Front 94

What three sections usually make up AGE?

Back 94

Repair/inspection

service pickup/deliveryAGE production support

Front 95

what AGE flight is in charge of TO files?

Back 95

Production support

Front 96

what is the overall mission of the Armament Flight?

Back 96

off-equipment maintenance on guns, pylons, racks, and launchers

Front 97

who does the armament flight CC/Chief assist in recommending distribution of 2W1X1 personnel to satisfy on- and off-equipment weapons release and gun system maintenance?

Back 97

WWM (wing weapons manager)

Front 98

Which armament flight section coordinates with MOF PS&D in scheduling inspections, TCTOs and time-changes?

Back 98

Armament maintenance

Front 99

Which avionics flight does off-equipment maintenance and CND screening on communication and navigation components and systems?

Back 99

COMMNAV

Front 100

which avionics section maintains LANTIRN pods?

Back 100

Sensors

Front 101

what section maintains, programs, and performs TCTOs on avionics components when the specified test stations and support equipment are available?

Back 101

avionics intermediate section

Front 102

What sections make up the Fabrication (FAB) flight?

Back 102

Aircraft Structure Maintenance (ASM)Low-Observable (LO) ASMMetals TechNDI

Front 103

Which 2 FAB flights are responsible for corrosion control?

Back 103

ASMLow-Observable ASM

Front 104

What is the Metals Tech section in charge of?

Back 104

manufacturing

repairing

servicing

welding acft structure

Front 105

What four sections make up maintenance?

Back 105

Repair and Reclamation (R&R)Wheel and TireAircraft InspectionTransient Alert

Front 106

Which maintenance flight removes, replaces, and rigs flight control surfaces?

Back 106

Repair and Reclamation

Front 107

What is the definition of Transient Alert?

Back 107

any acft not assigned to the local base

Front 108

which munitions flight assembles, disassembles, delivers, inspects, and maintains conventional munitions, missiles, containers, and dispensers?

Back 108

munitions production flight

Front 109

Which Munitions flight manages unit mobility and training?

Back 109

Munitions systems flight

Front 110

who acts as the wing focal point for propulsion maintenance programs, and gives advice to wing leadership about propulsion issues?

Back 110

propulsion flight CC or chief

Front 111

Which propulsion flight section stores, builds, tears down, modifies, and repairs engines, quick engine change kits, and test equip?

Back 111

Jet Engine Intermediate Maintenance (JEIM)

Front 112

Which propulsion flight is responsible for maintaining, managing, and storing engine support trailers?

Back 112

Engine Equip maintenance

Front 113

Which TMDE flight section performs in-lab and on-site calibration and repair, using lab equip and calibration standard?

Back 113

PMEL

Front 114

who does the PMEL QA section evaluators report their inspection findings to?

Back 114

TMDE flight CC/Chief

Front 115

what are the four elements of the TMDE production control section?

Back 115

customer service

production scheduling

traffic management

maintenance supply liason