Modest Proposal

Improved Essays
EXECUTIVE SUMMARY
The main purpose of the tender submission is to show our dedication and enthusiasm in understanding the design package of mousetrap car of Group 4B. The tender evaluation criteria list provides the criterion that have to be fulfilled by us in order to contract Group 4B design. Therefore, we as the contractors of Group 7A have to produce tender submission which provides explanation and evidences on how we fulfilled the criterion from the tendering company. There are few reasons that we chose the design package of Group 4B. One of the reasons is the design of mousetrap car of Group 4B is stable and efficient which can function welly since the prototype had been built. In addition, the cost of constructing the
…show more content…
Punctuality and upright time management results in work being done quickly with higher productivity and evades any last minute works. Contractors who possess punctuality and upright time management will attend meetings on time (punctual).
Addressing Criteria: Phoenix INC. requires the contractors to be always punctual and can manage the time perfectly. As the contractors, we attended our first meeting with the designers from Phoenix INC. punctually on 11:30a.m 2nd of April which is agreed by us and them. Moreover, we sent our minutes of meetings of 6th and 13th April to Hoo one of the designers on time as they requested to send the minutes of meeting within 24hours after the meeting.

5.0 Teamwork
Phoenix INC. entails teamwork among the contractors and designers in order to effectively and successfully completed the project. Contractors need to seek help from the designers and discuss for further information on the design. Contractors and designers will need to contribute their share to the workload and complete the project
…show more content…
The tender evaluation criteria list provides the criterion that have to be fulfilled by us in order to contract Group 4B design. Therefore, we as the contractors of Group 7A have to produce tender submission which provides explanation and evidences on how we fulfilled the criterion from the tendering company. There are few reasons that we chose the design package of Group 4B. One of the reasons is the design of mousetrap car of Group 4B is stable and efficient which can function welly since the prototype had been built. In addition, the cost of constructing the mousetrap car is low. Moreover, we are able to meet the criterion that required by the tender company. Nevertheless, we are able to communicate nicely with the designers without arguing with them even though we have better opinions about their design package. In conclusion, this tender submission is able to show our capability on complete the project which is satisfied by the Phoenix INC. In addition, this tender also shows our desire on contracting Phoenix INC.

Related Documents

  • Improved Essays

    Armed with ingenuity and the latest technology, our brightest minds work with you to identify your needs, then tackle project planning to develop an individualized plan to deliver…

    • 226 Words
    • 1 Pages
    Improved Essays
  • Improved Essays

    Carson Manor Case Study

    • 892 Words
    • 4 Pages

    Situation Analysis: Carson Manor, founded in city of Winston 30 years ago, is a non-profit organization that provides nursing care service. It has a bed capacity of 470 and a total of 235 employees. Carson Manor has a history of problems related to budgeting and cost control. Also, City Council believed that the cost per bed for Carson Manor was significantly higher than privately run institutions. Therefore, the council asked the city administrator.…

    • 892 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    When constructing the car, the goal was to make the car as sturdy as possible in order for the car to travel a great distance in a short amount of time. To do this, we researched various ways to create a mousetrap car. Additionally, we incorporated our own ideas to enhance the construction after trial and error. First, our team gathered all of the necessary materials that we would need to construct the car. These materials included one mousetrap, cardboard pieces, six balloons, four eye hooks, 2 smooth pens, string, and four small records.…

    • 1294 Words
    • 6 Pages
    Improved Essays
  • Decent Essays

    Though this car may seem like the solution to numerous problems, it comes with its disadvantages. As a result of increased use of self-driving cars, a large cut on public transportation jobs may occur. In addition, extreme weather conditions may play a role in affecting the efficiency of the car. Despite these, a number of advantages come with this marshmallow-shaped vehicle. It allows for more personal time and the opportunity for the elderly and the physically impaired to experience the thrill of driving.…

    • 490 Words
    • 2 Pages
    Decent Essays
  • Improved Essays

    Audi Quattro Case Study

    • 946 Words
    • 4 Pages

    17. Audi Quattro (1981): The Audi Quattro is a rally and road car was manufactured by Audi in the German Automobile and part of the Volkswagen Group. The featuring of the Audi Quattro was the first to mate the 4 wheel drive with turbocharger engine. The fastest cars engine was 2144 CC, inline five cylinder and 10 valves SOHC with the intercooler and turbocharger.…

    • 946 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Question 2: Garcia and Foster’s documentation of their understanding of the client’s environment was free from any problems except on their judgement on the internal control of the company. Internal controls are to be tested for design, efficiency and operational effectiveness. The details of internal controls tested are not seen in the work papers. In addition, the nature, timing and extent of further audit procedures in not available. There was no sufficient understanding of the client’s process of gathering, updating and analyzing information.…

    • 523 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    We analyzed problems, learned about the negative and positive impact, set solution criteria and standards, and then only decisions were made. Member’s participations are another key to success in small projects like…

    • 777 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    The Capsula

    • 448 Words
    • 2 Pages

    Imagine you’re driving down the road- running late to a concert- and you hit major traffic. You start to panic, but then remember it’s not a porblem, because your car turns into an airplane. Since the first car was created over 100 years ago, inventors have been coming up with different and unique ways to enhance the automobile. The Capsula, the Portable Plane Car, and the Dymaxion are all unique because of their design, they have never been produced to the public, and have never been done before.…

    • 448 Words
    • 2 Pages
    Improved Essays
  • Improved Essays

    Independent Contractor Agreement This Independent Contractor Agreement ("Agreement") is made and entered into by and between, ___("Contractor") and___(“Client”). 1. Engagement of Services. Contractor will provide Client with the following services: 2.…

    • 569 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    This interests me because it gives an example where we need humans to do a job that technology cannot. Technological advancement is huge and positive usually, but in this case there is a problem in this idea of new vehicle technology because of lack of…

    • 827 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Teamcenter Procter & Gamble creates a collaborative community Teamcenter lifecycle collaboration technology offers a quick, cost-effective way to extend the reach of product knowledge to the consumer product giant’s entire enterprise and huge supplier base Siemens PLM Software www.siemens.com/plm Issues: Support innovation among geographically dispersed development teams Speed time-to-market and reduce costs Provide virtual 3D design reviews P RO C T E R & G A M B L E To optimize the effectiveness of distributed product development teams, Procter & Gamble needed a collaborative strategy that included everyone. A geographically dispersed giant Procter & Gamble (P&G) is one of the world’s leading manufacturers of consumer packaged…

    • 941 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Communication, Metrics, and Project Updates Communication in project management is necessary to ensure that the management team - project managers, functional managers, and in this situation, the PMO - are in sync to clearly identify and communicate the project requirements. The communication metrics is an integral part of the monitoring and controlling process used to communicate updates, to include status of the project milestones and deliverables. The communication process or protocol is usually identified in a communication management plan based on specific tasks or questions developed during a project’s planning stage (Mepyans-Robinson, 2006): • Who will make decisions on issues? • Who will develop an action list of tasks and who will…

    • 1195 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    Process Groups There are five different types of process groups that are broken down in project management. Within each process group, value is added from the beginning to the end of the project. It is up to the project leader to make sure every project provides a substantial amount of information that would be instrumental in making the project successful. Groups for each project require initiation, planning, execution, monitoring/controlling, and closing. Many benefits come from the process groups throughout the project.…

    • 946 Words
    • 4 Pages
    Improved Essays
  • Great Essays

    Infosys Consulting in 2006: Leading the Next Generation of Business and Information Technology Consulting Dhinesh E -139278037 Holistic View The case is set in early 2006. An overview about the Information Technology (IT) services landscape is provided for this period.…

    • 1591 Words
    • 7 Pages
    Great Essays
  • Superior Essays

    It has been analysed from above models that Aston Martin have some influences that might have an impact on their business, from their products to the sales and their customers. From Aston Martin’s SWOT analysis it is clear that they are growing stronger, they maintain sold bond with their suppliers and making cost effective distributing channel of their product to consumer, this results in various revenue path and helps in making customers aware of their brand. As discussed Aston Martin aims at targeting young customers that are head strong and generally appreciate in buying sleek and fast gadgets. In order to target their young customer, the brand has created power image which can be experienced and shares by all car lovers all around the…

    • 1483 Words
    • 6 Pages
    Superior Essays