term1 Definition1term2 Definition2term3 Definition3
Please sign in to your Google account to access your documents:
Circulating pumps used in hot water heating systems are usually:
1) Reciprocating pumps
2) Gear type pumps
3) Rotary pumps
4) Regenerative pumps
5) Centrifugal pumps
Centrifugal pumps
The expansion tank is normally attached to the:
1) Highest point in the system
2) Supply line after the circulating pump
3) Supply line above the lowest convector
4) Return line directly before the boiler
5) Boiler or the hot water supply line near the boiler
Boiler or the hot water supply line near the boiler
A device used on smaller heating boilers to measure water "head" or height is the:
1) Gauge glass
2) Syphon
3) Altitude gauge
4) Pressure gauge
5) Header
Altitude gauge
The temperature control on a steam to hot water converter, controls the:
1) Water flow
2) Steam control valve
3) Steam temperature
4) Firing rate
5) Pump speed
Steam control valve
Diverter fittings are used in the supply lines to heating units when:
1) There are no balancing valves installed in the supply line
2) Compensating for a low heating load
3) A hydraulic balance must be corrected
4) The distance from boiler to heating unit is short
5) A higher heating output is required from the heating unit
A higher heating output is required from the heating unit
The purpose of a pressure reducing valve is to:
1) Reduce water hammer in a heating system
2) Maintain hot water at a required pressure
3) To reduce the feedwater pressure to the boiler
4) Level out the flow of steam or hot water
5) Automatically reduce pressure and maintain it
Automatically reduce pressure and maintain it
Need help typing ? See our FAQ (opens in new window)
Please sign in to create this set. We'll bring you back here when you are done.
Discard Changes Sign in
Please sign in to add to folders.
Sign in
Don't have an account? Sign Up »
You have created 2 folders. Please upgrade to Cram Premium to create hundreds of folders!